Better World

Schneider Electric TeSys D LC1D Contactor, 48 V ac Coil, 3-Pole, 80 A, 45 kW, 3NO, 1 kV ac

N° de stock RS:: 608-9807
Référence fabricant:: LC1D80E7
Fabricant:: Schneider Electric

Schneider Electric TeSys D LC1D Contactor, 48 V ac Coil, 3-Pole, 80 A, 45 kW, 3NO, 1 kV ac

Price la pièce**

359,39 €

(TVA exclue)

434,86 €

(TVA incluse)

3 En stock pour livraison sous 4 jour(s)*

* Les dates de livraison peuvent varier selon la quantité choisie et l'adresse de livraison.

FRAIS de livraison offerts pour toute commande de plus de 75,00 €

Unité	Prix par unité
1 +	359,39 €

**prix conseillé

Better World

Notre gamme de produits Better World vous facilite l'accès à des produits plus durables et plus fiables. Cliquez ici pour en savoir plus.

N° de stock RS:: 608-9807
Référence fabricant:: LC1D80E7
Fabricant:: Schneider Electric

Se connecter pour voir les modèles CAO

Schneider Electric LC1D TeSys D Contactors.

TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.

Features and Benefits.

Built-in auxiliary contacts for added switching capability.

Screw connections: IP20 finger-safe terminals with both North American and International terminal markings.

Can be panel mounted with screws or DIN Rail mounted.

Bidirectional peak limiting diode suppressor to protect the coil.

Easily installed accessories.

Flexible control circuit to suit a wide range of applications.

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.

AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.

AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

What accessories are available?

Auxiliary contact blocks with serrated wiping action.

Front mount dust tight auxiliary contact blocks.

Pneumatic time delay blocks.

Transient voltage surge suppressors.

Interface modules and electronic timers.

Mechanical latching blocks.

Is the TeSys D range a double break pole type contactor?

Yes, the Tesys D range uses linear translation movement that provides double breaking of the poles.

Schneider Electric LC1D80E7

TeSys Deca contactor, 3 poles (3NO), for motor control applications up to 80A/1000V AC-3/AC-3e (37kW@400V). They can be used to create motor starters for almost any type of application. It provides a 48V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), power connection by screw terminals, control connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60Â°C, it procures high reliability and durability. Compact (85mm width), DIN-rail mounting or screw fixing. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHs/Reach). When used with a 480VAC up to 150A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 175A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 48 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 5.12 inches deep. It weighs 3.51 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

LC1D80E7 Schneider Electric LC1D TeSys D Contactor Features.

Motor Control and Resistive load applications.

AC-1, AC-3, AC-4 category.

Ue Rated voltage Power circuit: <= 300 V DC 25...400 Hz, Power circuit: <= 690 V AC.

Rated current 125 A (at <= 440 V AC AC-1 for power circuit, 80 A (at <= 440 V AC AC-3 for power circuit.

48 V AC 50/60 Hz Control circuit voltage.

1 NO + 1 NC auxiliary contact.

Overvoltage category III.

Rated breaking capacity 1100 A at 440 V for power circuit conforming to IEC 60947.

Complete with a protective cover.

Plate and Rail mounting.

IP22 front face conforming to IEC 60529.

Approvals

BV, CCC, CSA, DNV, GL, GOST, RINA, UL, LROS.

Standards

EN 60947-4-1, EN 60947-5-1, IEC 60947-4-1, IEC 60947-5-1, UL 508, CSA C22.2 No 14.

Attribut	Valeur
Coil Voltage	48 V ac
Number of Poles	3
Contact Voltage Rating	1 kV ac
Contact Current Rating	80 A
Range	TeSys D
Power Rating	45 kW
Series	LC1D
Normal State Configuration	3NO
Auxiliary Contact Configuration	1NO + 1NC
Number Of Auxiliary Contacts	2
Terminal Type	Screw
Width	85mm
Length	127mm
Depth	125mm
Better World Verification	Green Premium
Better World Product	Yes
Minimum Operating Temperature	-5°C
Maximum Operating Temperature	+60°C