ABB GJL131 Contactor, 60V dc Coil, 3-Pole, 20 A, 5.5 kW 60V dc, 3 NO/1 NC, 690V

N° de stock RS:: 253-4830
Référence fabricant:: GJL1313001R0013
Fabricant:: ABB

ABB GJL131 Contactor, 60V dc Coil, 3-Pole, 20 A, 5.5 kW 60V dc, 3 NO/1 NC, 690V

Voir l’ensemble des Contactors

Sous-total (1 unité)*

30,88 €

(TVA exclue)

37,36 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Stocké-e par le fabricant

Prêt à être expédié à partir du 18 mai 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	30,88 €

*Prix donné à titre indicatif

N° de stock RS:: 253-4830
Référence fabricant:: GJL1313001R0013
Fabricant:: ABB

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	ABB
	Product Type	Contactor
	Coil Voltage	60V dc
	Number of Poles	3
	Contact Voltage	690V
	Contact Current	20A
	Series	GJL131
	Power Rating	5.5kW
	Function	Mini Contactor
	Mount Type	DIN Rail
	Normal State Configuration	3 NO/1 NC
	Number of Auxiliary Contacts	1
	Auxiliary Contact Configuration	0 NO/1 NC
	Terminal Type	Screw
	Operational Current Ie	20A
	Minimum Operating Temperature	-25°C
	Contactor Application	Control Unit
	Control Circuit Voltage Uc	60V dc
	Maximum Operating Temperature	55°C
	Depth	46.7mm
	Width	53mm
	Standards/Approvals	UL 60947-4-1, IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1, UL 60947-1
	Length	46.7mm

	Sélectionner tout
	Marque ABB
	Product Type Contactor
	Coil Voltage 60V dc
	Number of Poles 3
	Contact Voltage 690V
	Contact Current 20A
	Series GJL131
	Power Rating 5.5kW
	Function Mini Contactor
	Mount Type DIN Rail
	Normal State Configuration 3 NO/1 NC
	Number of Auxiliary Contacts 1
	Auxiliary Contact Configuration 0 NO/1 NC
	Terminal Type Screw
	Operational Current Ie 20A
	Minimum Operating Temperature -25°C
	Contactor Application Control Unit
	Control Circuit Voltage Uc 60V dc
	Maximum Operating Temperature 55°C
	Depth 46.7mm
	Width 53mm
	Standards/Approvals UL 60947-4-1, IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1, UL 60947-1
	Length 46.7mm

Datasheet - GJL1313001R0013

Pays d'origine :: DE

ABB GJL131 Series Contactor, 20A Contact Current, 60V DC Coil Voltage - GJL1313001R0013

This contactor is a Compact switching device designed for commercial control circuits, enabling remote connection and disconnection of three-phase loads in automation and electrical systems. It operates from a low-voltage DC control input and provides a three-pole switching arrangement suited to motor and power control tasks in installations where space-efficient mounting is required.

Features and Benefits:

• 3P configuration delivering 20 A operational current for power switching
• 60V DC control circuit enabling low-voltage Coil operation
• 690V rated contacts for high-voltage load compatibility
• 5.5 kW power rating supporting modest motor drive applications
• Screw terminals for secure conductor termination and maintenance
• DIN-rail or wall-mount versatility for varied panel layouts

Applications

• Suitable for commercial motor starters in building automation
• Ideal for control panels requiring Compact three-pole switching
• Used with modest industrial motors up to 5.5 kW
• Can be used for load isolation in HVAC control systems
• Used for auxiliary switching where one NC output is required

What auxiliary contact arrangement is provided and how is it typically used?

It includes one auxiliary contact in a normally closed state to permit a single fault-monitor or interlock circuit while retaining three normally open power poles for load switching.

What environmental limits should be observed during installation?

The unit is intended to operate between -25 °C and 55 °C, so ambient conditions and enclosure ventilation must keep temperatures within this range.

How is the device mounted and wired in Compact control panels?

It is suitable for DIN-rail clipping or direct wall mounting and uses screw-type terminals to accept standard control and load conductors.

Which standards does it conform to for application in industrial systems?

It meets the IEC/EN 60947 series requirements and corresponding UL standards for low-voltage switchgear and controlgear, supporting use in compliant installations.