ABB GJL121 Contactor, 12V Coil, 3-Pole, 20 A, 4 kW 12V, 3 NO/1 NC, 250 V dc, 690V ac

N° de stock RS:: 253-4758
Référence fabricant:: GJL1213001R0017
Fabricant:: ABB

ABB GJL121 Contactor, 12V Coil, 3-Pole, 20 A, 4 kW 12V, 3 NO/1 NC, 250 V dc, 690V ac

Visuel non contractuel

Voir l’ensemble des Contactors

Sous-total (1 paquet de 10 unités)*

312,52 €

(TVA exclue)

378,15 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Stocké-e par le fabricant

Prêt à être expédié à partir du 06 juillet 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	le paquet*
10 +	31,252 €	312,52 €

*Prix donné à titre indicatif

N° de stock RS:: 253-4758
Référence fabricant:: GJL1213001R0017
Fabricant:: ABB

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	ABB
	Product Type	Contactor
	Coil Voltage	12V
	Number of Poles	3
	Contact Voltage	250, 690V dc
	Contact Current	20A
	Series	GJL121
	Power Rating	4kW
	Function	Mini Contactor
	Mount Type	DIN Rail, Wall
	Normal State Configuration	3 NO/1 NC
	Auxiliary Contact Configuration	0 NO/1 NC
	Number of Auxiliary Contacts	1
	Terminal Type	Screw
	Minimum Operating Temperature	-25°C
	Operational Current Ie	20A
	Contactor Application	Control Unit
	Control Circuit Voltage Uc	12V
	Maximum Operating Temperature	55°C
	Length	46.7mm
	Width	52.5mm
	Depth	46.7mm
	Standards/Approvals	IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1, UL 60947-1, UL 60947-4-1
	Pole and Throw Configuration	3P

	Sélectionner tout
	Marque ABB
	Product Type Contactor
	Coil Voltage 12V
	Number of Poles 3
	Contact Voltage 250, 690V dc
	Contact Current 20A
	Series GJL121
	Power Rating 4kW
	Function Mini Contactor
	Mount Type DIN Rail, Wall
	Normal State Configuration 3 NO/1 NC
	Auxiliary Contact Configuration 0 NO/1 NC
	Number of Auxiliary Contacts 1
	Terminal Type Screw
	Minimum Operating Temperature -25°C
	Operational Current Ie 20A
	Contactor Application Control Unit
	Control Circuit Voltage Uc 12V
	Maximum Operating Temperature 55°C
	Length 46.7mm
	Width 52.5mm
	Depth 46.7mm
	Standards/Approvals IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1, UL 60947-1, UL 60947-4-1
	Pole and Throw Configuration 3P

Datasheet - GJL1213001R0017

Pays d'origine :: DE

ABB GJL121 Series Contactor, 20A Contact Current, 12V Coil Voltage - GJL1213001R0017

This contactor is a Compact switching device designed to control three-phase loads in commercial, industrial and residential electrical systems. It operates with a 12V control circuit and provides a mains switching solution for motors and power equipment up to 4kW, mounted on DIN rail or fixed to a wall for flexible installation in automated panels and distribution enclosures.

Features and Benefits:

• Three-pole switching delivers three independent line control and safety
• 20A operational current supports medium-duty motor and load switching
• 250V DC and 690V AC ratings allow use with DC and AC supply systems
• Single auxiliary contact offers control-circuit signalling and interlock
• Screw terminals enable secure terminations for repeated service
• Compliance with IEC/EN and UL standards assists regulatory acceptance

Applications

• Suitable for contact control in industrial automation panels
• Ideal for motor switching in light commercial HVAC systems
• Used with residential distribution boards for load management
• Can be used for control of machinery in electronics assembly lines

What environmental temperatures will it tolerate in service?

It is specified to operate between -25°C and 55°C, allowing deployment in typical indoor and sheltered plantroom conditions.

What mounting arrangements are available for panel designers?

It supports both DIN rail attachment and direct wall mounting to suit differing panel layouts and enclosure types.

How many auxiliary contacts are provided for signalling?

There is one auxiliary contact arranged normally as 0NO/1NC to facilitate control logic and status feedback.

What are the physical connection details for electrical contractors?

Terminations use screw-type terminals to secure conductor connections during installation and maintenance.