ABB 1SBL37 Contactor, 3-Pole, 65 A, 30 kW 130V, 48 V, 3 NO, 690V
- N° de stock RS:
- 253-2016
- Référence fabricant:
- 1SBL377001R6911
- Fabricant:
- ABB
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 253-2016
- Référence fabricant:
- 1SBL377001R6911
- Fabricant:
- ABB
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ABB | |
| Product Type | Contactor | |
| Number of Poles | 3 | |
| Contact Voltage | 690V | |
| Contact Current | 65A | |
| Series | 1SBL37 | |
| Power Rating | 30kW | |
| Function | Control Unit | |
| Normal State Configuration | 3 NO | |
| Auxiliary Contact Configuration | 1 NO | |
| Number of Auxiliary Contacts | 1 | |
| Terminal Type | Screw | |
| Contactor Application | Capacitor Switching | |
| Control Circuit Voltage Uc | 130V, 48V | |
| Minimum Operating Temperature | -25°C | |
| Operational Current Ie | 115A | |
| Maximum Operating Temperature | 55°C | |
| Standards/Approvals | CSA C22-2 N°14, EN 50155 (applicable parts), For compliance confirmation on applicable parts based on your application and combination, IEC 60077-1 (applicable parts), IEC 60077-2 (applicable parts), IEC 61373, IEC/EN 60947-1, IEC/EN 60947-4-1, please consult your ABB sales representatives, TR CU 001/2011 (on request), UL 508 | |
| Length | 108mm | |
| Depth | 110mm | |
| Width | 82mm | |
| Pole and Throw Configuration | 3P | |
| Sélectionner tout | ||
|---|---|---|
Marque ABB | ||
Product Type Contactor | ||
Number of Poles 3 | ||
Contact Voltage 690V | ||
Contact Current 65A | ||
Series 1SBL37 | ||
Power Rating 30kW | ||
Function Control Unit | ||
Normal State Configuration 3 NO | ||
Auxiliary Contact Configuration 1 NO | ||
Number of Auxiliary Contacts 1 | ||
Terminal Type Screw | ||
Contactor Application Capacitor Switching | ||
Control Circuit Voltage Uc 130V, 48V | ||
Minimum Operating Temperature -25°C | ||
Operational Current Ie 115A | ||
Maximum Operating Temperature 55°C | ||
Standards/Approvals CSA C22-2 N°14, EN 50155 (applicable parts), For compliance confirmation on applicable parts based on your application and combination, IEC 60077-1 (applicable parts), IEC 60077-2 (applicable parts), IEC 61373, IEC/EN 60947-1, IEC/EN 60947-4-1, please consult your ABB sales representatives, TR CU 001/2011 (on request), UL 508 | ||
Length 108mm | ||
Depth 110mm | ||
Width 82mm | ||
Pole and Throw Configuration 3P | ||
- Pays d'origine :
- BG
ABB AF63 Series Contactor, 65A Contact Current, 48 to 130V Control Circuit Voltage - 1SBL377001R6911
This contactor is a compact, three-pole control unit designed to switch power circuits up to 690V and manage capacitor switching and motor control in industrial installations. It accepts a wide control Coil voltage range for AC 50/60Hz and DC supplies, offering tolerant operation through voltage fluctuations and short interruptions, while providing auxiliary contact functionality for control signalling.
Features & Benefits
• 65A rated current reduces conductor sising for mid-range loads
• 115A operational capability supports higher continuous duty
• 30kW AC-3 power rating enables direct motor switching at 380/400V
• 48 to 130V Coil accepts AC and DC supplies for flexible control
• 3NO main pole arrangement simplifies three-phase connections
• Screw terminals provide robust, low-resistance wiring connections
• 115A operational capability supports higher continuous duty
• 30kW AC-3 power rating enables direct motor switching at 380/400V
• 48 to 130V Coil accepts AC and DC supplies for flexible control
• 3NO main pole arrangement simplifies three-phase connections
• Screw terminals provide robust, low-resistance wiring connections
Applications
• Suitable for switching capacitor banks in power-factor correction schemes
• Ideal for three-phase motor starters in automation panels
• Used for bypass and load-transfer arrangements in switchgear
• Can be used for lighting and general AC power circuit control
• Suitable for DC power circuit switching where applicable
• Ideal for three-phase motor starters in automation panels
• Used for bypass and load-transfer arrangements in switchgear
• Can be used for lighting and general AC power circuit control
• Suitable for DC power circuit switching where applicable
What Coil voltage ranges will operate reliably in fluctuating supplies?
The control Coil accepts 48 to 130V on 50Hz, 60Hz or DC and is designed to tolerate dips or interruptions up to 20ms.
How does it perform thermally at elevated ambient temperatures?
Rated operational currents reduce with temperature
for example, Ie at 690V is 115A at 40°C and decreases to 95A at 55°C.
What protection and switching frequencies are supported in heavy-cycle use?
Mechanical endurance is 10 million operations with electrical switching frequencies up to 300 cycles/h for AC-1 and AC-3 duty, and 150 cycles/h for AC-2/AC-4.
Which Terminal types and conductor sizes are compatible for main and auxiliary circuits?
Main circuit screw terminals accept flexible 6 to 16mm² or rigid 6 to 25mm²
auxiliary terminals take flexible 0.75 to 2.5mm² or rigid 1 to 4mm².
What breaking capacity can be expected at industrial voltages?
Maximum breaking capability varies by system reactance
values include up to 1300A at 440V (cosφ=0.45) and 630A at 690V (cosφ=0.45).
Liens connexes
- ABB 1SBL37 Contactor 65 A 48 V 690V
- ABB 1SBL2 Contactor 48 V Coil 50 A 48 V 690V
- ABB 1SBL17 Contactor 48 V Coil 4 A 48 V 690V
- ABB 1SBL36 Contactor 48 V Coil 100 A 48 V 690V
- ABB 1SBL2 Contactor 48 V Coil 50 A 48 V 690V
- ABB 1SBL23 Contactor 48 V Coil 26 A 48 V 690V
- ABB 1SBL27 Contactor 48 V Coil 50 A 48 V 690V
- ABB 1SBL13 Contactor 48 V Coil 4 A 48 V 690V