ABB 1SBL37 Contactor, 380V, 400 V Coil, 3-Pole, 115 A 400V, 415 V, 3 NO, 690V
- N° de stock RS:
- 253-2014
- Référence fabricant:
- 1SBL371022R8500
- Fabricant:
- ABB
Sous-total (1 unité)*
237,58 €
(TVA exclue)
287,47 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 80,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 08 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 237,58 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 253-2014
- Référence fabricant:
- 1SBL371022R8500
- Fabricant:
- ABB
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ABB | |
| Coil Voltage | 380, 400V | |
| Product Type | Contactor | |
| Number of Poles | 3 | |
| Contact Voltage | 690V | |
| Contact Current | 115A | |
| Series | 1SBL37 | |
| Function | Capacitor Switching | |
| Normal State Configuration | 3 NO | |
| Terminal Type | Screw | |
| Control Circuit Voltage Uc | 400, 415V | |
| Minimum Operating Temperature | -40°C | |
| Operational Current Ie | 115A | |
| Contactor Application | Control Unit | |
| Maximum Operating Temperature | 80°C | |
| Depth | 110mm | |
| Length | 108mm | |
| Width | 108mm | |
| Standards/Approvals | EU Directive 2011/65/EU, IEC 60947-4-1, VDE 0110, UL/CSA | |
| Pole and Throw Configuration | 3P | |
| Sélectionner tout | ||
|---|---|---|
Marque ABB | ||
Coil Voltage 380, 400V | ||
Product Type Contactor | ||
Number of Poles 3 | ||
Contact Voltage 690V | ||
Contact Current 115A | ||
Series 1SBL37 | ||
Function Capacitor Switching | ||
Normal State Configuration 3 NO | ||
Terminal Type Screw | ||
Control Circuit Voltage Uc 400, 415V | ||
Minimum Operating Temperature -40°C | ||
Operational Current Ie 115A | ||
Contactor Application Control Unit | ||
Maximum Operating Temperature 80°C | ||
Depth 110mm | ||
Length 108mm | ||
Width 108mm | ||
Standards/Approvals EU Directive 2011/65/EU, IEC 60947-4-1, VDE 0110, UL/CSA | ||
Pole and Throw Configuration 3P | ||
- Pays d'origine :
- BG
The ABB UA63 3-pole contactors for capacitor switching, can be used for the switching of capacitor banks whose in rush current peaks are less than or equal to 100 times nominal rms current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the maximum peak current values accepted by the contactor.
Degree of Protection IP20
Ambient air temperature for operation is -40 to +70 °C
Screw terminal
Liens connexes
- ABB 1SBL18 Contactor 3-Pole 400 to 415 V 690V
- ABB 1SBL24 Contactor 3-Pole 4 NO, 690V
- ABB 1SBL41 Contactor 3-Pole 380 to 400 V 690V
- ABB GJL121 Contactor 3-Pole 4 kW 380 to 415 V 690V dc
- ABB UA Contactor 3-Pole 415 to 440 V 690V
- ABB GJL121 Contactor 3-Pole 4 kW 415 V 690V
- ABB GJL121 Contactor 3-Pole 4 kW 415 V 690V
- ABB GJL131 Contactor 3-Pole 5.5 kW 415 V 690V
