ABB UA16 Contactor, 110V Coil, 3-Pole, 3 NO, 690V

N° de stock RS:: 253-1937
Référence fabricant:: 1SBL181022R8410
Fabricant:: ABB

ABB UA16 Contactor, 110V Coil, 3-Pole, 3 NO, 690V

Voir l’ensemble des Contactors

Sous-total (1 unité)*

63,23 €

(TVA exclue)

76,51 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

Plus 4 unité(s) expédiée(s) à partir du 08 juin 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	63,23 €

*Prix donné à titre indicatif

N° de stock RS:: 253-1937
Référence fabricant:: 1SBL181022R8410
Fabricant:: ABB

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	ABB
	Product Type	Contactor
	Coil Voltage	110V
	Number of Poles	3
	Contact Voltage	690V
	Series	UA16
	Function	Capacitor Switching
	Mount Type	DIN Rail
	Normal State Configuration	3 NO
	Auxiliary Contact Configuration	1 NO
	Number of Auxiliary Contacts	1
	Terminal Type	Screw
	Operational Current Ie	6A
	Control Circuit Voltage Uc	110V
	Contactor Application	Control Unit
	Minimum Operating Temperature	-60°C
	Maximum Operating Temperature	80°C
	Depth	74mm
	Width	44mm
	Standards/Approvals	RoHS Status, EU Directive 2011/65/EU
	Length	74mm
	Pole and Throw Configuration	3P

	Sélectionner tout
	Marque ABB
	Product Type Contactor
	Coil Voltage 110V
	Number of Poles 3
	Contact Voltage 690V
	Series UA16
	Function Capacitor Switching
	Mount Type DIN Rail
	Normal State Configuration 3 NO
	Auxiliary Contact Configuration 1 NO
	Number of Auxiliary Contacts 1
	Terminal Type Screw
	Operational Current Ie 6A
	Control Circuit Voltage Uc 110V
	Contactor Application Control Unit
	Minimum Operating Temperature -60°C
	Maximum Operating Temperature 80°C
	Depth 74mm
	Width 44mm
	Standards/Approvals RoHS Status, EU Directive 2011/65/EU
	Length 74mm
	Pole and Throw Configuration 3P

Pays d'origine :: BG

ABB UA16 Series Contactor, 110V Coil Voltage, 6A Operational Current - 1SBL181022R8410

This contactor is a three-pole control unit designed for switching capacitor banks in industrial electrical systems. It operates from AC control circuits at 50/60 Hz and is suited to applications where precise capacitor switching and Compact DIN-rail mounting are required.

Features & Benefits

• 6A operational current supports moderate load switching
• 110 to 120V control circuit enables 50/60 Hz compatibility
• 690V main contact rating handles high-voltage capacitor banks
• 1 NO auxiliary screw Terminal provides simple signalling integration
• -60 °C to 80 °C temperature range allows extreme storage and use
• 3,600 mechanical cycles per hour supports frequent operation

Applications

• Suitable for capacitor bank switching in power factor correction panels
• Ideal for industrial automation control cabinets on DIN rail
• Used for switching capacitors with high Peak inrush currents within limits
• Can be used where Compact width and shallow depth are required

What inrush current conditions can it tolerate when switching capacitors?

It accepts capacitor switching where inrush peaks are up to 100 times the nominal RMS current and requires capacitors to be discharged to ≤50V before re-energisation.

How does the unit connect within a control panel?

Main and auxiliary circuits use screw terminals with cable clamps

main poles are delivered in the open position for straightforward wiring.

What are the Coil consumption and operate times?

Average pull-in and holding values vary with frequency

pull-in values are approximately 70 to 74 V·A and 70 to 80 V·A depending on 50/60 Hz, with operate times between 10 to 26 MS for closing and 4 to 11 MS for opening sequences.

Which protective devices are appropriate for short-circuit protection?

Short-circuit protective devices include gG fuses in recommended ranges and specific breaking capacities at 440V and 690V according to cos φ conditions.