Eaton DILM Contactor, 24V ac Coil, 3-Pole, 9 A, 4 kW 24V ac, 3 NO, 400V ac
- N° de stock RS:
- 178-8031
- Numéro d'article Distrelec:
- 301-29-538
- Référence fabricant:
- 276729 DILM9-01(24V50/60HZ)
- Fabricant:
- Eaton
Sous-total (1 unité)*
37,39 €
(TVA exclue)
45,24 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 21 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 8 unité(s) expédiée(s) à partir du 08 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 37,39 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 178-8031
- Numéro d'article Distrelec:
- 301-29-538
- Référence fabricant:
- 276729 DILM9-01(24V50/60HZ)
- Fabricant:
- Eaton
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Eaton | |
| Coil Voltage | 24V ac | |
| Product Type | Contactor | |
| Number of Poles | 3 | |
| Contact Voltage | 400V ac | |
| Contact Current | 9A | |
| Power Rating | 4kW | |
| Series | DILM | |
| Mount Type | DIN Rail | |
| Function | Motor Control, Resistive Load | |
| Normal State Configuration | 3 NO | |
| Number of Auxiliary Contacts | 1 | |
| Auxiliary Contact Configuration | 1 NC | |
| Terminal Type | Screw Clamp | |
| Minimum Operating Temperature | -25°C | |
| Operational Current Ie | 9A | |
| Contactor Application | Motor Control | |
| Control Circuit Voltage Uc | 24V ac | |
| Maximum Operating Temperature | 60°C | |
| Depth | 117mm | |
| Standards/Approvals | IEC, UL, CSA | |
| Width | 45mm | |
| Length | 68mm | |
| Pole and Throw Configuration | 3P | |
| Sélectionner tout | ||
|---|---|---|
Marque Eaton | ||
Coil Voltage 24V ac | ||
Product Type Contactor | ||
Number of Poles 3 | ||
Contact Voltage 400V ac | ||
Contact Current 9A | ||
Power Rating 4kW | ||
Series DILM | ||
Mount Type DIN Rail | ||
Function Motor Control, Resistive Load | ||
Normal State Configuration 3 NO | ||
Number of Auxiliary Contacts 1 | ||
Auxiliary Contact Configuration 1 NC | ||
Terminal Type Screw Clamp | ||
Minimum Operating Temperature -25°C | ||
Operational Current Ie 9A | ||
Contactor Application Motor Control | ||
Control Circuit Voltage Uc 24V ac | ||
Maximum Operating Temperature 60°C | ||
Depth 117mm | ||
Standards/Approvals IEC, UL, CSA | ||
Width 45mm | ||
Length 68mm | ||
Pole and Throw Configuration 3P | ||
Statut RoHS : Exempté
Eaton 3-Pole Contactor, 5.5kW Power Rating, 24V AC Coil Voltage - DILM Series - 276729 DILM9-01(24V50/60HZ)
Features & Benefits
• Minimal heat dissipation per pole of 0.2W for energy efficiency
• Clip-on DIN rail mounting for simple, tool-free installation
• Rated impulse withstand voltage of 8kV to handle sudden voltage surges without damage
• Screw terminals can flexibly accommodate wire sizes from 18 to 14AWG
• Terminals are located out of reach of fingers for enhanced safety
What's the coil voltage rating of this contactor?
This contactor has a coil voltage rating of 24V AC, making it a practical choice for low-voltage systems.
Is this contactor waterproof?
This contactor's IP20 rating indicates it has no protection against water ingress, so it's not suitable for moist working areas.
Note
Eaton formerly known as Moeller
Liens connexes
- Eaton DILM Contactor 3-Pole 1 NC, 400V
- Eaton DILM Contactor 3-Pole 4 kW 24V ac 400V ac
- Eaton DILM Contactor 3-Pole 4 kW 690V
- Eaton DILM Contactor 3-Pole 3 kW 24V ac 400V ac
- Eaton DILM Contactor 3-Pole 1 NO, 690V
- Eaton DILM Contactor 3-Pole 1 NC, 690V
- Eaton DILM Contactor 3-Pole 18.5 kW 24V ac 400V ac
- Eaton DILM Contactor 3-Pole 30 kW 24V ac 400V ac