RS PRO Omni-Directional, Through Hole 9.7 mm Microphone Condenser -41dB
- N° de stock RS:
- 171-0878
- Fabricant:
- RS PRO
Sous-total (1 plateau de 100 unités)*
81,70 €
(TVA exclue)
98,90 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 100 unité(s) prête(s) à être expédiée(s)
- Plus 100 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 600 unité(s) expédiée(s) à partir du 23 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le plateau* |
|---|---|---|
| 100 + | 0,817 € | 81,70 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 171-0878
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Microphone Condenser | |
| Sensitivity | -41dB | |
| Directivity | Omni-Directional | |
| Standard Operating Voltage | 1.5V | |
| Mount Type | Through Hole | |
| Output Impedance | 2.2kΩ | |
| Signal to Noise Ratio | 60dB | |
| Diameter | 9.7mm | |
| Maximum Frequency | 16kHz | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 70°C | |
| Height | 5mm | |
| Standards/Approvals | No | |
| Termination Style | Solder Pad | |
| Minimum Frequency | 50Hz | |
| Supply Current | 0.5mA | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Microphone Condenser | ||
Sensitivity -41dB | ||
Directivity Omni-Directional | ||
Standard Operating Voltage 1.5V | ||
Mount Type Through Hole | ||
Output Impedance 2.2kΩ | ||
Signal to Noise Ratio 60dB | ||
Diameter 9.7mm | ||
Maximum Frequency 16kHz | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 70°C | ||
Height 5mm | ||
Standards/Approvals No | ||
Termination Style Solder Pad | ||
Minimum Frequency 50Hz | ||
Supply Current 0.5mA | ||
- Pays d'origine :
- CN
RS PRO Omni-Directional 9.7 mm Microphone Condenser -41 dB
Boost the quality of your recorded sound with this omni-directional microphone condenser element from RS PRO. You simply slot the component into place inside your device. It's often found in home and commercial recording studios. This microphone condenser picks up with equal strength whether you're in front, behind or to one side of the mic.
You'll be able to pick up sounds indoors or outside, as this microphone condenser element works in conditions ranging from -20°C to +70°C. It's suitable for capturing even very subtle sounds thanks to its -41 dB sensitivity. For versatility, this component can work from a direct current or a radio frequency. This product is suitable for recording singing and musical instruments.
Features and Benefits
• Dimensions of 9.7 (diameter) x 4.5 mm
• Omni-directional directivity
• Height of 5 mm
• Maximum frequency of 16 kHz
• Maximum operating temperature of +70°C
• Maximum supply current of 0.5 mA
• Minimum frequency of 50 Hz
• Minimum operating temperature of -20°C
• Output impedance of 2.2 kΩ
• Sensitivity of -41 dB
• Signal to noise ratio of 60 dB
• Standard operating voltage of 1.5 V
Liens connexes
- RS PRO Omni-Directional, Through Hole 9.7 mm Microphone Condenser -41dB
- RS PRO Omni-Directional, Surface Mount 6 mm Microphone Condenser -41dB
- Same Sky Omni-Directional, Pin 9.7 mm Condenser Microphone Component -42dB
- Same Sky Omni-Directional, Terminal 9.7 mm Condenser Microphone Component -42dB
- Same Sky Omni-Directional, Pin 9.7 mm Condenser Microphone Component -44dB
- RS PRO Omni-Directional, Through Hole 3 mm Microphone Condenser -44dB
- RS PRO Omni-Directional, Through Hole 6 mm Microphone Condenser -42dB
- RS PRO Omni-Directional, Through Hole 4 mm Microphone Condenser -44dB