TLV3502AIDCNT Texas Instruments 2-Channel Comparator Push Pull, Push Pull O/P, 4.5 ns 5.5V 3 V 8-Pin SOT-23
- N° de stock RS:
- 922-3287
- Référence fabricant:
- TLV3502AIDCNT
- Fabricant:
- Texas Instruments
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 922-3287
- Référence fabricant:
- TLV3502AIDCNT
- Fabricant:
- Texas Instruments
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Texas Instruments | |
| Product Type | Comparator | |
| Comparator Type | General Purpose | |
| Mount Type | Surface, Surface Mount | |
| Package Type | SOT-23 | |
| Output Type | Push Pull, Push Pull | |
| Number of Channels | 2 | |
| Typical Response Time | 4.5ns | |
| Pin Count | 8 | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 3V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | No | |
| Width | 1.63 mm | |
| Series | TLV350x | |
| Length | 2.9mm | |
| Height | 1.1mm | |
| Supply Current | 3.2mA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Texas Instruments | ||
Product Type Comparator | ||
Comparator Type General Purpose | ||
Mount Type Surface, Surface Mount | ||
Package Type SOT-23 | ||
Output Type Push Pull, Push Pull | ||
Number of Channels 2 | ||
Typical Response Time 4.5ns | ||
Pin Count 8 | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 3V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals No | ||
Width 1.63 mm | ||
Series TLV350x | ||
Length 2.9mm | ||
Height 1.1mm | ||
Supply Current 3.2mA | ||
Automotive Standard No | ||
TLV series Low Voltage Comparators
Comparators, Texas Instruments
Texas Instruments range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for Rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of Faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
Liens connexes
- TLV3501AIDBVT Texas Instruments Push-Pull O/P 5 V 6-Pin SOT-23
- Texas Instruments 1-Channel Comparator Push Pull O/P, 2.9 ns 5.5 V 2.7 V 5-Pin SOT-23
- Texas Instruments 1-Channel Comparator Push Pull O/P, 4.5 ns 5.5 V 5 V 6-Pin SOT-23
- TLV3201AIDBVT Texas Instruments 1-Channel Comparator Push Pull O/P, 2.9 ns 5.5 V 2.7 V 5-Pin SOT-23
- TLV3501AIDBVT Texas Instruments 1-Channel Comparator Push Pull O/P, 4.5 ns 5.5 V 5 V 6-Pin SOT-23
- Texas Instruments 1-Channel Comparator Push Pull O/P, 4 μs 15 V 2.7 V 5-Pin SOT-23
- Texas Instruments 1-Channel Comparator Push Pull O/P, 4 μs 15 V 3 V 5-Pin SOT-23
- Texas Instruments 1-Channel Comparator Push Pull O/P, 7 ns 5 V 2.7 V 5-Pin SOT-23
