LM392M/NOPB Texas Instruments Comparator CMOS/TTL O/P, 1.3 μs 32 V 3 V 8-Pin SOIC
- N° de stock RS:
- 536-1372
- Référence fabricant:
- LM392M/NOPB
- Fabricant:
- Texas Instruments
Sous-total (1 unité)*
1,36 €
(TVA exclue)
1,65 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Dernier stock RS
- 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- 20 unité(s) finale(s) expédiée(s) à partir du 16 février 2026
Unité | Prix par unité |
|---|---|
| 1 + | 1,36 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 536-1372
- Référence fabricant:
- LM392M/NOPB
- Fabricant:
- Texas Instruments
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Texas Instruments | |
| Comparator Type | Low Power | |
| Product Type | Comparator | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Output Type | CMOS/TTL | |
| Typical Response Time | 1.3μs | |
| Pin Count | 8 | |
| Maximum Supply Voltage | 32V | |
| Minimum Supply Voltage | 3V | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Height | 1.45mm | |
| Standards/Approvals | No | |
| Length | 4.9mm | |
| Width | 3.9 mm | |
| Automotive Standard | No | |
| Supply Current | 2mA | |
| Sélectionner tout | ||
|---|---|---|
Marque Texas Instruments | ||
Comparator Type Low Power | ||
Product Type Comparator | ||
Mount Type Surface | ||
Package Type SOIC | ||
Output Type CMOS/TTL | ||
Typical Response Time 1.3μs | ||
Pin Count 8 | ||
Maximum Supply Voltage 32V | ||
Minimum Supply Voltage 3V | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Height 1.45mm | ||
Standards/Approvals No | ||
Length 4.9mm | ||
Width 3.9 mm | ||
Automotive Standard No | ||
Supply Current 2mA | ||
Combined Comparator & Operational Amplifier
Integrated solutions from Texas Instruments combining a general purpose operational amplifier and voltage comparator in a single package.
Comparators, Texas Instruments
Texas Instruments range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
Liens connexes
- LM392N/NOPB Texas Instruments OP Amp + Comparator CMOS/TTL O/P, 1.3 μs 32 V 3 V 8-Pin MDIP
- Texas Instruments OP Amp + Comparator CMOS/TTL O/P, 1.3 μs 32 V 3 V 8-Pin MDIP
- LM339MX/NOPB Texas Instruments 4-Channel Comparator ECL TTL MOS O/P, 1.3 μs 36 V 36 V 13-Pin SOIC
- Texas Instruments 4-Channel Comparator ECL TTL MOS O/P, 1.3 μs 36 V 36 V 13-Pin SOIC
- LM392M/NOPB Texas Instruments 8-Pin SOIC
- Texas Instruments 4-Channel Comparator TTL CMOS O/P, 1.3 μs 30 V 2 V 14-Pin PDIP
- Texas Instruments 2-Channel Comparator TTL MOS O/P, 1.3 μs 30 V 2 V 8-Pin PDIP
- Texas Instruments 4-Channel Comparator MOS CMOS O/P, 1.3 μs 36 V 2 V 14-Pin SOIC
