STMicroelectronics 4-Channel Comparator ECL, TTL, DTL, MOS, CMOS O/P, 1.3 μs 36 V 2 V 16-Pin QFN
- N° de stock RS:
- 189-2126P
- Référence fabricant:
- LM2901Q4T
- Fabricant:
- STMicroelectronics
Sous-total 25 unités (conditionné en bande continue)*
4,525 €
(TVA exclue)
5,475 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 5 675 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 25 + | 0,181 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 189-2126P
- Référence fabricant:
- LM2901Q4T
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Comparator Type | Low Power | |
| Product Type | Comparator | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Output Type | ECL, TTL, DTL, MOS, CMOS | |
| Number of Channels | 4 | |
| Typical Response Time | 1.3μs | |
| Pin Count | 16 | |
| Minimum Supply Voltage | 2V | |
| Maximum Supply Voltage | 36V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Series | LM2901 | |
| Length | 3.1mm | |
| Width | 3.1 mm | |
| Height | 0.95mm | |
| Standards/Approvals | No | |
| Supply Current | 2.5mA | |
| Automotive Standard | AEC-Q1, AEC-Q2, AEC-Q3, AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Comparator Type Low Power | ||
Product Type Comparator | ||
Mount Type Surface | ||
Package Type QFN | ||
Output Type ECL, TTL, DTL, MOS, CMOS | ||
Number of Channels 4 | ||
Typical Response Time 1.3μs | ||
Pin Count 16 | ||
Minimum Supply Voltage 2V | ||
Maximum Supply Voltage 36V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Series LM2901 | ||
Length 3.1mm | ||
Width 3.1 mm | ||
Height 0.95mm | ||
Standards/Approvals No | ||
Supply Current 2.5mA | ||
Automotive Standard AEC-Q1, AEC-Q2, AEC-Q3, AEC-Q100 | ||
- Pays d'origine :
- MY
This device consists of four independent precision voltage comparators, which are designed specifically to operate from a single supply over a wide range of voltages. Operation from split power supplies is also possible. These comparators also have a unique characteristic in that the input common-mode voltage range includes the negative rail even though operated from a single power supply voltage.
Wide single supply voltage range or dual supplies for all devices: +2 V to +36 V or ±1 V to ±18 V
Very low supply current (1.1 mA) independent of supply voltage (1.4 mW/comparator at +5 V)
Low input bias current: 25 nA typ.
Low input offset current: ±5 nA typ.
Input common-mode voltage range includes negative rail
Low output saturation voltage:250 mV typ. (IO= 4 mA)
Differential input voltage range equal to the supply voltage
TTL, DTL, ECL, MOS, CMOS compatible outputs