LM339PW Texas Instruments Comparator Open Collector O/P, 1.3 μs 14-Pin TSSOP
- N° de stock RS:
- 178-8810
- Référence fabricant:
- LM339PW
- Fabricant:
- Texas Instruments
Sous-total (1 tube de 90 unités)*
61,47 €
(TVA exclue)
74,34 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Dernier stock RS
- 360 dernière(s) unité(s), prête(s) à l'envoi d'un autre centre de distribution
Unité | Prix par unité | le tube* |
|---|---|---|
| 90 + | 0,683 € | 61,47 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 178-8810
- Référence fabricant:
- LM339PW
- Fabricant:
- Texas Instruments
Spécifications
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Texas Instruments | |
| Product Type | Comparator | |
| Comparator Type | General Purpose | |
| Mount Type | Surface Mount | |
| Package Type | TSSOP | |
| Output Type | Open Collector | |
| Typical Response Time | 1.3μs | |
| Pin Count | 14 | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Width | 4.4 mm | |
| Length | 5mm | |
| Height | 1.15mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Texas Instruments | ||
Product Type Comparator | ||
Comparator Type General Purpose | ||
Mount Type Surface Mount | ||
Package Type TSSOP | ||
Output Type Open Collector | ||
Typical Response Time 1.3μs | ||
Pin Count 14 | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Width 4.4 mm | ||
Length 5mm | ||
Height 1.15mm | ||
LMx39/LM2901 family Quad Comparators
The Texas Instruments LM139, LM239, LM339 and LM2901 are quad differential input voltage comparators designed to operate from a single power supply over a wide range of voltages. The common mode input voltage range includes ground and the devices have open collector outputs.
Comparators, Texas Instruments
Texas Instruments range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
Liens connexes
- LM239PWR Texas Instruments Open Collector O/P, 1.3μs 3 → 28 V 14-Pin TSSOP
- LM2901PW Texas Instruments Open Collector O/P, 1.3μs 3 → 28 V 14-Pin TSSOP
- LM339NG onsemi Open Collector O/P, 1.3μs 5 → 28 V 14-Pin PDIP
- LM139AD Texas Instruments Open Collector O/P, 1.3μs 3 → 28 V 14-Pin SOIC
- LM2901D Texas Instruments Open Collector O/P, 1.3μs 3 → 28 V 14-Pin SOIC
- LM2901M/NOPB Texas Instruments Open Collector O/P, 1.3μs 3 → 28 V 14-Pin SOIC
- LM2903AVQPWR Texas Instruments Open Collector O/P, 1.3μs 3 → 28 V 8-Pin TSSOP
- BA2901SF-E2 ROHM Open Collector O/P, 1.3μs 2 → 36 V 14-Pin SOP
