Texas Instruments 1-Channel Comparator Push Pull O/P, 7 ns 5 V 2.7 V 5-Pin SC-70
- N° de stock RS:
- 100-5960
- Référence fabricant:
- LMV7219M7/NOPB
- Fabricant:
- Texas Instruments
Sous-total (1 bobine de 1000 unités)*
1 915,00 €
(TVA exclue)
2 317,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 15 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 1000 + | 1,915 € | 1 915,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 100-5960
- Référence fabricant:
- LMV7219M7/NOPB
- Fabricant:
- Texas Instruments
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Texas Instruments | |
| Comparator Type | General Purpose | |
| Product Type | Comparator | |
| Mount Type | Surface | |
| Package Type | SC-70 | |
| Output Type | Push Pull | |
| Number of Channels | 1 | |
| Typical Response Time | 7ns | |
| Pin Count | 5 | |
| Maximum Supply Voltage | 5V | |
| Minimum Supply Voltage | 2.7V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Height | 0.9mm | |
| Length | 2mm | |
| Standards/Approvals | No | |
| Width | 1.25 mm | |
| Automotive Standard | No | |
| Supply Current | 2.4mA | |
| Sélectionner tout | ||
|---|---|---|
Marque Texas Instruments | ||
Comparator Type General Purpose | ||
Product Type Comparator | ||
Mount Type Surface | ||
Package Type SC-70 | ||
Output Type Push Pull | ||
Number of Channels 1 | ||
Typical Response Time 7ns | ||
Pin Count 5 | ||
Maximum Supply Voltage 5V | ||
Minimum Supply Voltage 2.7V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Height 0.9mm | ||
Length 2mm | ||
Standards/Approvals No | ||
Width 1.25 mm | ||
Automotive Standard No | ||
Supply Current 2.4mA | ||
LMV series Low Voltage Comparators
Comparators, Texas Instruments
Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.
Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for Rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of Faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.
Liens connexes
- LMV7219M7/NOPB Texas Instruments Push-Pull O/P, 2.7 → 5 V 5-Pin SC-70
- TLV3201AIDCKT Texas Instruments Push-Pull O/P, 2.7 → 5.5 V 5-Pin SC-70
- LMV331ICT STMicroelectronics Open Drain O/P, 2.7 → 5 V 5-Pin SC-70
- LMV331SQ3T2G onsemi Open Drain O/P, 2.7 → 5 V 5-Pin SC-70
- LMV7219M5/NOPB Texas Instruments Push-Pull O/P, 2.7 → 5 V 5-Pin SOT-23
- LMV331M7/NOPB Texas Instruments 0.45μs 5 V 5-Pin SC-70-5
- TS3011ICT STMicroelectronics Push-Pull O/P, 8ns 2.2 → 5 V 5-Pin SC-70
- TS3021ICT STMicroelectronics Push-Pull O/P, 0.04μs 3 V 5-Pin SC-70