MCP6564T-E/ST Microchip 4-Channel Analogue Comparator Push Pull O/P, 5.5 V 1.8 V 14-Pin TSSOP-14
- N° de stock RS:
- 598-224
- Référence fabricant:
- MCP6564T-E/ST
- Fabricant:
- Microchip
Sous-total (1 bobine de 2500 unités)*
2 952,50 €
(TVA exclue)
3 572,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 23 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 2500 + | 1,181 € | 2 952,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 598-224
- Référence fabricant:
- MCP6564T-E/ST
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | Analogue Comparator | |
| Comparator Type | Push-Pull Output | |
| Mount Type | Surface | |
| Package Type | TSSOP-14 | |
| Output Type | Push Pull | |
| Number of Channels | 4 | |
| Pin Count | 14 | |
| Minimum Supply Voltage | 1.8V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | RoHS | |
| Length | 5.10mm | |
| Width | 6.4 mm | |
| Series | MCP6564 | |
| Height | 1.2mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type Analogue Comparator | ||
Comparator Type Push-Pull Output | ||
Mount Type Surface | ||
Package Type TSSOP-14 | ||
Output Type Push Pull | ||
Number of Channels 4 | ||
Pin Count 14 | ||
Minimum Supply Voltage 1.8V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals RoHS | ||
Length 5.10mm | ||
Width 6.4 mm | ||
Series MCP6564 | ||
Height 1.2mm | ||
Automotive Standard No | ||
The Microchip comparators are optimized for low power, single-supply operation with greater than rail to rail input operation. The push-pull output of the this comparator family supports rail to rail output swing, and interfaces with TTL/CMOS logic. The output limits supply current surges, and dynamic power consumption while switching. AEC-Q100 Grade 1 qualification is available for this device.
47ns Propagation Delay
Low Operating Voltage 1.8V to 5.5V
Low Operating Current 100uA (typical)
Rail to Rail Input/output
Small 14 pin TSSOP Package
AEC-Q100 Grade 1
Liens connexes
- MCP6544-E/ST Microchip Push-Pull O/P, 1.8 → 5.5 V 14-Pin TSSOP
- MCP6564-E/ST Microchip Push-Pull O/P, 0.02μs 1.8 → 5.5 V 14-Pin TSSOP
- MCP6564-E/ST Microchip Push-Pull O/P, 0.02μs 1.8 to 5.5 V 14-Pin TSSOP
- MCP6574T-E/ST Microchip Push-Pull Output O/P, 40ns 1.8 V 14-Pin TSSOP
- MCP6569-E/ST Microchip Open Drain O/P, 1.8 → 5.5 V 14-Pin TSSOP
- MCP6569-E/ST Microchip Open Drain O/P, 1.8 to 5.5 V 14-Pin TSSOP
- MCP6579T-E/ST Microchip Open Drain O/P, 40ns 1.8 V 14-Pin TSSOP
- TS864IPT STMicroelectronics Push-Pull O/P, 500ns 2.7 → 10 V 14-Pin TSSOP