TS3121IYLT STMicroelectronics, Comparator, Open Drain O/P, 1.7 → 5.5 V 5-Pin SOT323-5

Offre groupée disponible

Sous-total (1 unité)*

1,30 €

(TVA exclue)

1,57 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 3 000 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 - 91,30 €
10 - 991,18 €
100 - 4991,08 €
500 - 9990,98 €
1000 +0,89 €

*Prix donné à titre indicatif

Options de conditionnement :
N° de stock RS:
285-644
Référence fabricant:
TS3121IYLT
Fabricant:
STMicroelectronics
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

STMicroelectronics

Comparator Type

Analog Comparator

Mounting Type

Surface Mount

Package Type

SOT323-5

Power Supply Type

Single

Output Type

Open Drain

Number of Channels per Chip

1

Pin Count

5

Typical Single Supply Voltage

1.7 → 5.5 V

Pays d'origine :
MY
The STMicroelectronics TS3121 single comparators permit high-speed response time at low power consumption over a supply voltage specified from 1.7 to 5.5 V. These devices operate over a wide temperature range from -40 °C to +125 °C making them ideal for industrial and automotive applications with the associated qualification. Thanks to an embedded fail-safe circuit, the TS3121 and the TS3121A can operate with input/output pins biased while the supply pin is shut down to VCC = 0 V for energy saving applications. A guaranteed start-up time ensures a stable output condition after activating the supply rail. Thanks to their small package size, the TS3121 and the TS3121A can be used in applications where space on the board is limited. It can thus reduce the overall cost of the PCB.

Low offset voltage 2mV max 25°C for A-grade version
Low power consumption 70 μA typ
Wide supply voltage 1.7 to 5.5 V
Propagation delay 60 ns
Fail-safe input and output pins
Input and output pins withstand voltages higher than VCC
Fail safe architecture keeps output in high impedance when VCC = 0 V
Guaranteed start-up time allows sequential on and off cycles of VCC
High ESD tolerance 4 kV HBM

Liens connexes