Microchip CAN Bus Monitor MCP2515 Development Kit MCP2515DM-BM

Voir la catégorie

Sous-total (1 unité)*

148,67 €

(TVA exclue)

179,89 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +148,67 €

*Prix donné à titre indicatif

N° de stock RS:
698-8899
Numéro d'article Distrelec:
173-88-900
Référence fabricant:
MCP2515DM-BM
Fabricant:
Microchip
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Microchip

Product Type

Communication & Wireless Development Tool

Kit Classification

Development Kit

Featured Device

MCP2515

Kit Name

CAN Bus Monitor

Interface Type

USB

Standards/Approvals

RoHS

CAN Bus Monitor Demonstration Board


Microchips MCP2515DM-BM demo board is a duo board kit that can create a CAN (Controller Area Network) bus. The two boards are identical and are connected with a CAN cable, while the other board is connected to the host PC. The software for this board can be used to send and receive CAN messages and configure the registers. The MCP2515 boars are both reversible meaning either one can take the others role, depending on how you have them connected.

Depending on the configuration of your cables, the board connected to your PC will become the monitor, and the other board will become the Traffic Generator.

Features and Benefits:


  • PIC18F4550 PIC MCU with ICD2 interface for in-circuit programming

  • Testing points for monitoring MCP2515 pins (CAN, SPI and status)

  • Can be connected to an existing CAN bus

  • Identical boards allow for neither to be a master board

  • Button for changing the bus load on the Traffic Generator node

    • MCP2515 Firmware:


    http://ww1.microchip.com/downloads/en/DeviceDoc/MCP2515DM-BM_Firmware.zip

    MCP2515 PC Software:


    http://ww1.microchip.com/downloads/en/DeviceDoc/BusMonitor_v2.0.0.22.zip

    Whats in the box:


  • 2x CAN Bus monitoring boards

  • 1x Connector cable

  • 1x USB A to USB B

  • 1x Information sheet

    • CAN Bus Communication - Microchip


    Supplied with

    CAN cable, CAN bus PC software.

    Liens connexes