Microchip IoT Network Controller ATWINC1510 WiFi Module 2.4GHz ATWINC1500-MR210PB1952

Visuel non contractuel

Voir la catégorie
Offre groupée disponible

Sous-total (1 unité)*

7,06 €

(TVA exclue)

8,54 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Dernier stock RS
  • 270 dernière(s) unité(s), prête(s) à l'envoi d'un autre centre de distribution
Unité
Prix par unité
1 - 47,06 €
5 - 96,72 €
10 +6,55 €

*Prix donné à titre indicatif

N° de stock RS:
146-3395
Référence fabricant:
ATWINC1500-MR210PB1952
Fabricant:
Microchip
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Microchip

RF Technology

WiFi

Kit Classification

Module

Featured Device

ATWINC1510

Kit Name

IoT Network Controller

Frequency

2.4GHz

Microchip's WINC1500 is an IEEE 802.11 b/g/n IoT network controller. It is the ideal add-on to existing MCU solutions bringing Wi-Fi and Network capabilities through SPI-to-Wi-Fi interface. The WINC1500 connects to any SAM, PIC24 and PIC32 MCU with minimal resource requirements. The WINC1500's most advanced mode is a single stream 1x1 802.11n mode providing up to 72 Mbps PHY throughput. The WINC1500 features a fully integrated Power Amplifier, LNA, Switch and Power Management. The WINC1500 provides internal Flash memory as well as multiple peripheral interfaces including UART and SPI. The only external clock source needed for the WINC1500 is a high-speed crystal or oscillator (26 MHz). The WINC1500 is available in a QFN package or as a certified module. The ATWINC1500 has 4 Mb of flash memory which can be used for system software. The ATWINC1510 has 8 Mb flash memory for even greater flexibility.

Single-band 2.4GHz b/g/n
Extreme low power
Compact footprint: 5 x 5 mm QFN
Operating voltage: 3.0V to 4.2V
Serial host interface: SPI
Security protocols supported: WPA/WPA2 Personal, TLS, SSL
Network services: DHCP, DNS, TCP/IP (IPv4), UDP, HTTP, HTTPS
Antenna Options:
Chip and PCB antenna (ATWINC1500-MR210PB)
Chip and u.FL connector (ATWINC1500-MR210UB)
Available in a fully-certified module package:
ATWINC1500-MR210PB1952 (4Mb flash)
ATWINC1510-MR210PB1952 (8Mb flash)
Part numbers reflect SW version, now available with SDK v19.5.2
ATWINC15x0-MR210xB1952
Recommended for new designs
SDK 19.5.2 with TLS v1.2 server mode support, Crypto ECC508 integration, WPA2 security to AP mode & more
Integrated into Atmel Studio 7 - See ASF release notes
ATWINC1510-MR210PB1944 (Legacy SDK)
Atmel Software Framework (ASF) Free Software download available

Liens connexes