Murata 140 mA Common Mode Choke 2 Ω 5V
- N° de stock RS:
- 125-3210
- Référence fabricant:
- DLP11SN121SL2L
- Fabricant:
- Murata
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 125-3210
- Référence fabricant:
- DLP11SN121SL2L
- Fabricant:
- Murata
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Murata | |
| Product Type | Common Mode Choke | |
| Series | DLP11S | |
| Maximum DC Current | 140mA | |
| Impedance | 120Ω | |
| Packaging | Embossed Tape | |
| Test Frequency | 100MHz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Automotive Standard | No | |
| Mount Type | Surface | |
| Choke Voltage | 5V | |
| Maximum DC Resistance | 2Ω | |
| Depth | 1mm | |
| Length | 1.25mm | |
| Termination Style | Solder Pad | |
| Standards/Approvals | RoHS, REACH | |
| Height | 0.82mm | |
| Package/Case | 0504 | |
| Sélectionner tout | ||
|---|---|---|
Marque Murata | ||
Product Type Common Mode Choke | ||
Series DLP11S | ||
Maximum DC Current 140mA | ||
Impedance 120Ω | ||
Packaging Embossed Tape | ||
Test Frequency 100MHz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Automotive Standard No | ||
Mount Type Surface | ||
Choke Voltage 5V | ||
Maximum DC Resistance 2Ω | ||
Depth 1mm | ||
Length 1.25mm | ||
Termination Style Solder Pad | ||
Standards/Approvals RoHS, REACH | ||
Height 0.82mm | ||
Package/Case 0504 | ||
- Pays d'origine :
- JP
Murata 0504 DLP11S Series SMD Common Mode Chokes
DLP11S series enables noise suppression for differential signal line without distortion in high-speed signal transmission due to its high coupling. The DLP11S series high cutoff frequency is suitable for high speed differential signal line such as HDMI.
Small size and tight dimensional tolerance Size: 1.25x1.0x0.82mm Tolerance: +-0.1mm
Useful impedance line-up from 67 ohm to 330 ohm
DLP11SN_HL2, DLP11SA series match with line impedance
Applications
Common mode noise suppression of high speed differential signal lines for USB, IEEE1394, LVDS
Note PCs, PDAs
Cellular phones
Digital Still Cameras, Digital Video Cameras
Murata SMD Common Mode Chokes
Liens connexes
- Murata 100 mA Common Mode Choke 3.6 Ω 5V
- Murata 150 mA Common Mode Choke 1.6 Ω 5V
- Murata 100 mA Common Mode Choke 4 Ω 5V
- Murata 160 mA Common Mode Choke 1.2 Ω 5V
- Murata 50 mA Common Mode Choke 4 Ω 5V
- Murata 130 mA Common Mode Choke 1.7 Ω 5V
- Murata 100 mA Common Mode Choke 2.7 Ω 5V
- Murata 120 mA Common Mode Choke 2.3 Ω 5V