Huber+Suhner ST18A Series Coaxial Cable Male Type N to Male N Type, 1.5 m 50 Ω
- N° de stock RS:
- 126-3140
- Référence fabricant:
- ST18A/Nm/Nm/1500 mm
- Fabricant:
- Huber+Suhner
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
539,78 €
(TVA exclue)
653,13 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 6 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 539,78 € |
| 5 + | 458,82 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 126-3140
- Référence fabricant:
- ST18A/Nm/Nm/1500 mm
- Fabricant:
- Huber+Suhner
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Huber+Suhner | |
| Product Type | Coaxial Cable | |
| Connector Type A | Type N | |
| Connector Type B | N Type | |
| Connector Gender A | Male | |
| Connector Gender B | Male | |
| Maximum Frequency | 18GHz | |
| Characteristic Impedance | 50Ω | |
| Cable Length | 1.5m | |
| Standards/Approvals | REACH Compliant | |
| Jacket Colour | Blue | |
| Jacket Material | Polytetrafluoroethylene | |
| Series | ST18A | |
| Sélectionner tout | ||
|---|---|---|
Marque Huber+Suhner | ||
Product Type Coaxial Cable | ||
Connector Type A Type N | ||
Connector Type B N Type | ||
Connector Gender A Male | ||
Connector Gender B Male | ||
Maximum Frequency 18GHz | ||
Characteristic Impedance 50Ω | ||
Cable Length 1.5m | ||
Standards/Approvals REACH Compliant | ||
Jacket Colour Blue | ||
Jacket Material Polytetrafluoroethylene | ||
Series ST18A | ||
- Pays d'origine :
- PL
Huber+Suhner Coaxial Cable, 1.5m Cable Length, 50Ω Characteristic Impedance - ST18A/Nm/Nm/1500 mm
This coaxial cable provides a protected RF link between equipment using N-type connectors and is intended for high-frequency interconnection in industrial and laboratory environments. It combines a 50Ω characteristic and PTFE outer covering to support sensitive signal transmission up to very high microwave frequencies while maintaining mechanical flexibility and a distinct blue finish for easy identification.
Features and Benefits:
• 50Ω characteristic for matched system impedance and minimal reflections
• Operates to 18GHz for high-frequency signal integrity
• Type N male to female terminations for secure RF mating
• PTFE jacket resists heat and chemical exposure while remaining flexible
• Blue outer sheath for Rapid Visual identification during installation
• Operates to 18GHz for high-frequency signal integrity
• Type N male to female terminations for secure RF mating
• PTFE jacket resists heat and chemical exposure while remaining flexible
• Blue outer sheath for Rapid Visual identification during installation
Applications
• Suitable for RF test benches requiring wideband connectivity
• Ideal for automated test systems in electronics manufacturing
• Used for antenna feedlines in laboratory evaluation setups
• Can be used for interconnects in electrical and mechanical test rigs
• Ideal for automated test systems in electronics manufacturing
• Used for antenna feedlines in laboratory evaluation setups
• Can be used for interconnects in electrical and mechanical test rigs
What connector genders are fitted to this cable?
One end is fitted with a male N connector and the opposite end with a female N connector to allow direct mating with corresponding N-type ports.
How long is the cable and how does length affect performance?
The cable length is 1.5 m and is optimised for short-run interconnections where lower insertion loss and stable VSWR are required.
What material is used for the cable jacket and why is it chosen?
The outer sheath is MADE from PTFE which offers low dielectric loss, thermal stability and resistance to a range of chemicals.
Is this cable suitable for precision RF measurements?
Yes, its 50Ω impedance and 18GHz bandwidth support measurements that demand controlled impedance and wide frequency response.
Liens connexes
- Huber+Suhner ST18A Series Coaxial Cable Male Type N to Female N Type, 1.5 m 50 Ω
- Huber+Suhner ST18A Series Coaxial Cable Male Type N to Male N Type, 3 m 50 Ω
- Huber+Suhner ST18A Series Coaxial Cable Male Type N to Female N Type, 3 m 50 Ω
- Huber+Suhner Sucoflex 126EA Series Coaxial Cable Male Type N to Male N Type, 1.5 m
- Huber+Suhner SUCOTEST Series Coaxial Cable Male Type N to Male N Type, 1.829 m 50 Ω
- Huber+Suhner SUCOTEST Series Coaxial Cable Male Type N to Male N Type, 1.219 m 50 Ω
- Huber+Suhner SUCOTEST Series Coaxial Cable Male Type N to Male N Type, 914 mm 50 Ω
- Huber+Suhner ST18 Series Coaxial Cable Male Straight to Male N Type, 4 ft 50 Ω