Huber+Suhner Straight 50 Ω RF Adapter 33GHz Female Female
- N° de stock RS:
- 741-7165
- Numéro d'article Distrelec:
- 302-47-498
- Référence fabricant:
- 31_PC35-50-0-2/199_NE
- Fabricant:
- Huber+Suhner
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 741-7165
- Numéro d'article Distrelec:
- 302-47-498
- Référence fabricant:
- 31_PC35-50-0-2/199_NE
- Fabricant:
- Huber+Suhner
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Huber+Suhner | |
| Adapter Type | PC 3.5 Socket to PC 3.5 Socket | |
| Product Type | RF Adapter | |
| Converts From Type | PC3.5 | |
| Converts to Type | PC3.5 | |
| Impedance | 50Ω | |
| Mount Type | Cable | |
| Orientation | Straight | |
| Operating Frequency | 33GHz | |
| Polarity | Normal | |
| Contact Plating | Gold over Nickel | |
| Converts to Gender - Connector | Female | |
| Converts to Gender - Contact | Female | |
| Coupling Style | Threaded | |
| Converts From Gender - Contact | Female | |
| Converts From Gender - Connector | Female | |
| Cable Type | Coaxial | |
| Length | 28.36mm | |
| Standards/Approvals | No | |
| Contact Material | Beryllium Copper Stainless Steel | |
| Sélectionner tout | ||
|---|---|---|
Marque Huber+Suhner | ||
Adapter Type PC 3.5 Socket to PC 3.5 Socket | ||
Product Type RF Adapter | ||
Converts From Type PC3.5 | ||
Converts to Type PC3.5 | ||
Impedance 50Ω | ||
Mount Type Cable | ||
Orientation Straight | ||
Operating Frequency 33GHz | ||
Polarity Normal | ||
Contact Plating Gold over Nickel | ||
Converts to Gender - Connector Female | ||
Converts to Gender - Contact Female | ||
Coupling Style Threaded | ||
Converts From Gender - Contact Female | ||
Converts From Gender - Connector Female | ||
Cable Type Coaxial | ||
Length 28.36mm | ||
Standards/Approvals No | ||
Contact Material Beryllium Copper Stainless Steel | ||
- Pays d'origine :
- CH
Hubner+Suhner Adaptors for QMA interfaces
Hubner+Suhner adaptors are used within measuring applications with QMA interfaces. These versatile adaptors support the calibration with Hubne+Suhner open standard interfaces, incorporating the same electrical length and the same return loss behaviour of all this series of adaptors the swapping method can be utilised.
Identical electrical length
Fast measurement set-up change: e.g. male to female
Measure devices with QMA interfaces
Precise calibration for phase critical measurements
50Ω, 18 GHz
HUBER+SUHNER QMA
The interface is based on the SMA dimensions, but instead of a threaded coupling mechanism, a new snap-lock mechanism is used.The QMA interface has a very similar performance to the SMA, but in addition it offers an easier, faster and safer coupling operation, resulting in significant time saving during the production of systems. The packaging density of QMA is increased compared to SMA connectors as no torque spanner is required to fasten the coupling nut.
Free-rotating connection when mated
SNAP-ON mating
Liens connexes
- Huber+Suhner Straight 50 Ω RF Adapter 33GHz Male Female
- Huber+Suhner 50 Ω Adapter 33GHz
- Huber+Suhner Straight 50 Ω RF Adapter 18GHz
- Huber+Suhner Straight 50 Ω RF Adapter 18GHz Female Female
- Huber+Suhner Straight 50 Ω RF Adapter 40GHz Female Female
- Huber+Suhner Straight 50 Ω Adapter 33GHz
- Huber+Suhner Straight 50 Ω RF Adapter 40GHz Male Female
- Huber+Suhner Straight 50 Ω RF Adapter 18GHz Male Female