Microchip Buffer 20-Pin TSSOP
- N° de stock RS:
- 264-8818P
- Référence fabricant:
- PL138-48OI
- Fabricant:
- Microchip
Offre groupée disponible
Consulter les options de prix de grosSous-total 10 unités (conditionné en tube)*
15,80 €
(TVA exclue)
19,10 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 25 octobre 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 10 - 18 | 1,58 € |
| 20 - 48 | 1,54 € |
| 50 - 74 | 1,345 € |
| 76 + | 1,235 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 264-8818P
- Référence fabricant:
- PL138-48OI
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | Buffer | |
| Mount Type | Surface | |
| Maximum Propagation Delay Time | 890ps | |
| Package Type | TSSOP | |
| Pin Count | 20 | |
| Minimum Supply Voltage | 2.5V | |
| Maximum Supply Voltage | 4.6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Series | PL138-48 | |
| Height | 0.85mm | |
| Standards/Approvals | RoHS | |
| Length | 3.5mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type Buffer | ||
Mount Type Surface | ||
Maximum Propagation Delay Time 890ps | ||
Package Type TSSOP | ||
Pin Count 20 | ||
Minimum Supply Voltage 2.5V | ||
Maximum Supply Voltage 4.6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Series PL138-48 | ||
Height 0.85mm | ||
Standards/Approvals RoHS | ||
Length 3.5mm | ||
Automotive Standard No | ||
The Microchip high performance low-cost 1:4 outputs differential LVPECL fan-out buffer. This buffer is designed to operate from a single power supply of 2.5V±5% or 3.3V±10%. The differential input pairs are designed to accept most standard input signal levels, using an appropriate resistor bias network, and produce a high quality set of outputs with the lowest possible skew on the outputs, which is guaranteed for part-to-part or lot-to lot skew. Designed to fit in a small form-factor package.
Four differential 2.5V/3.3V LVPECL output pairs
Output Frequency: =1GHz
Output Skew: 25ps (typ.)
Part-to-part skew: 140ps (typ.)
Propagation delay: 1.5ns (typ.)
Additive Jitter: <100fs (typ.)
Operating temperature range from -40°C to 85°C
Liens connexes
- Coral G950-06809-01 for use with Raspberry Pi
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series Transistor Output 2
- Carling Technologies Illuminated DPDT, On-(On) Rocker Switch Panel Mount
- SICK Encoder Collets for Use with DBS36E-BBxxxx
- Littelfuse Through Hole Gas Discharge Tube
- Igus GFM-0607-08 6mm Bore Plain Bearing, 7mm O.D
- Raspberry Pi QWERTY (Spain) Raspberry Pi Keyboard
- Coral Google Mini PCIe M.2 Accelerator B/M Development Kit G650-04686-01
