ITT Cannon Male Solder Circular Connector Contact, Contact Size 16 AWG, Wire Size 16AWG
- N° de stock RS:
- 329-8682
- Référence fabricant:
- T3P16MS1LY / 192900-0633
- Fabricant:
- ITT Cannon
Temporairement en rupture de stock
- N° de stock RS:
- 329-8682
- Référence fabricant:
- T3P16MS1LY / 192900-0633
- Fabricant:
- ITT Cannon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ITT Cannon | |
| Product Type | Circular Connector Contact | |
| Gender | Male | |
| Contact Size | 16 AWG | |
| Wire Size | 16AWG | |
| Current | 13A | |
| Series | T3P | |
| For Use With | Ringlock receptacles | |
| Contact Type | Signal | |
| Length | 26.19mm | |
| Contact Plating | Gold | |
| Voltage | 250V | |
| Minimum Operating Temperature | -55°C | |
| Contact Material | Brass | |
| Termination Type | Solder | |
| Maximum Operating Temperature | 125°C | |
| Maximum Contact Resistance | 5mΩ | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque ITT Cannon | ||
Product Type Circular Connector Contact | ||
Gender Male | ||
Contact Size 16 AWG | ||
Wire Size 16AWG | ||
Current 13A | ||
Series T3P | ||
For Use With Ringlock receptacles | ||
Contact Type Signal | ||
Length 26.19mm | ||
Contact Plating Gold | ||
Voltage 250V | ||
Minimum Operating Temperature -55°C | ||
Contact Material Brass | ||
Termination Type Solder | ||
Maximum Operating Temperature 125°C | ||
Maximum Contact Resistance 5mΩ | ||
Standards/Approvals No | ||
- Pays d'origine :
- DE
Solder Cup Contact
Suitable for 500 mating cycles
ITT TNM Shielded
The TNM connector range builds on the popular Trident and Neptune ranges from ITT Cannon. They feature full metal construction giving high reliability and durability.
RF shielding inherent in the full metal construction
Backshells enable cable braid termination so meeting EMC requirements
Signal versions have the same planform & contact arrangements as the QM range so upgrading and interchangeability can be achieved
Includes a rear rubber seal that enables IP67 rating to be maintained if only some contacts are used. The rubber seal can be discarded if a backshell is to be used. Both are rated to IP67
Cable, chassis and jam nut configurations available in standard and reversed formats
One, two or three part crimp contacts, also solder cup and PCB terminating contacts available for signal transfer. Power contacts are only required for power/signal connector types
Liens connexes
- ITT Cannon Male Solder Circular Connector Contact Wire Size 16AWG
- ITT Cannon Male Crimp Circular Connector Contact Wire Size 16AWG, 18 AWG
- ITT Cannon Female Crimp Circular Connector Contact Wire Size 16AWG, 18 AWG
- ITT Cannon Female Crimp Circular Connector Contact, Wire Size 16AWG
- ITT Cannon Male Crimp Circular Connector Contact, Wire Size 16AWG
- ITT Cannon Female Solder Circular Connector Contact Wire Size 8AWG
- ITT Cannon Female Crimp Circular Connector Contact Wire Size 16AWG
- ITT Cannon Male Crimp Circular Connector Contact 20 AWG
