ITT Cannon, TNMSize 16 Straight Circular Connector Backshell Strain Relief, For Use With Connector

Voir la catégorie
Offre groupée disponible

Sous-total (1 unité)*

14,17 €

(TVA exclue)

17,15 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • Plus 722 unité(s) expédiée(s) à partir du 13 avril 2026
  • Plus 100 unité(s) expédiée(s) à partir du 20 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 - 1914,17 €
20 - 3912,76 €
40 +11,47 €

*Prix donné à titre indicatif

N° de stock RS:
167-9742
Référence fabricant:
TNA16CC-HC00L / 192900-0497
Fabricant:
ITT Cannon
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

ITT Cannon

For Use With

Connector

Product Type

Circular Connector Backshell

Shell Size

16

Orientation

Straight

Gender

Female

Housing Material

Thermoplastic

Colour

Black

Length

89.8mm

IP Rating

IP67

Strain Relief

Yes

Series

TNM

Standards/Approvals

No

Pays d'origine :
HU

ITT Cannon Backshell


The ITT Cannon Trident Neptune series backshell is a circular connector with 16 shell size, membrane wire seal equipment. The connector body is made from black nylon material with nickel-plated copper alloy coupling ring and stainless steel bayonet pins. It accepts various combinations of signal (13A) and power (30A) contacts.

Neptune:

Based on the Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, it features a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available. To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires: 2.7mm to 4.0mm. The number of contacts shown as power/signal e.g. 2/13.

Features and Benefits


Durability of 500 mating cycles

Full interface and cable sealing

Insulation resistance of 5000Mohm

Operating temperature ranges between -55°C and 105°C

Operating voltage is up to 250VAC RMS

Printed circuit and coaxial contacts

Robust and cost-effective

Liens connexes