Siemens DIN Rail Control Switch Control Switch
- N° de stock RS:
- 622-0654
- Référence fabricant:
- 5TT4102-0
- Fabricant:
- Siemens
Visuel non contractuel
Sous-total (1 unité)*
53,83 €
(TVA exclue)
65,13 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 3 unité(s) expédiée(s) à partir du 23 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 53,83 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 622-0654
- Référence fabricant:
- 5TT4102-0
- Fabricant:
- Siemens
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Siemens | |
| Product Type | Control Switch | |
| Range | SENTRON | |
| Current Rating | 16A | |
| Series | SENTRON | |
| Mount Type | DIN Rail | |
| Sub Type | Control Switch | |
| Contact Configuration | 2 NO | |
| Terminal Type | Screw | |
| Standards/Approvals | UKCA, EAC, CE, VDE | |
| Sélectionner tout | ||
|---|---|---|
Marque Siemens | ||
Product Type Control Switch | ||
Range SENTRON | ||
Current Rating 16A | ||
Series SENTRON | ||
Mount Type DIN Rail | ||
Sub Type Control Switch | ||
Contact Configuration 2 NO | ||
Terminal Type Screw | ||
Standards/Approvals UKCA, EAC, CE, VDE | ||
- Pays d'origine :
- RO
Siemens SENTRON Series Control Switch, 16A Current, 2 NO Contact Configuration - 5TT4102-0
This control switch is a DIN rail-mounted remote switching device designed for industrial automation panels. It operates from an AC control supply with a setpoint of 230 V and provides two normally open contacts for switching loads up to 16 A. The unit offers galvanic isolation between Coil and contacts and is intended for use where Compact modular width and simple mechanical latching are required.
Features and Benefits:
• 16 A rated switching current delivers high load-handling capacity
• 2 NO contacts enable straightforward normally open control schemes
• Screw terminals accept 1 mm² to 6 mm² conductors for secure connections
• Mechanical latching provides defined state retention after actuation
• Electrical endurance 50,000 cycles supports long service intervals
• 2 NO contacts enable straightforward normally open control schemes
• Screw terminals accept 1 mm² to 6 mm² conductors for secure connections
• Mechanical latching provides defined state retention after actuation
• Electrical endurance 50,000 cycles supports long service intervals
Applications
• Suitable for DIN rail control panels in industrial automation
• Can be used for switching incandescent and fluorescent lighting loads
• Ideal for remote switching of 230 V AC control circuits
• Used with control systems requiring galvanic Coil to contact isolation
• Can be used for switching incandescent and fluorescent lighting loads
• Ideal for remote switching of 230 V AC control circuits
• Used with control systems requiring galvanic Coil to contact isolation
What supply voltage range will the control input accept?
The control input accepts AC with a setpoint of 230 V and an operating range from 184 V to 253 V.
How does the device perform with inductive or fluorescent loads?
It switches up to 16 A at cos φ 0.6 and provides specific apparent power capacities for fluorescent lamp configurations.
What Terminal and torque specifications apply for installation?
It uses six screw terminals for connections with tightening torque between 0.8 N·m and 1 N·m.
What environmental conditions define safe operation?
It is designed for ambient temperatures from -10 °C to 40 °C and accommodates up to 95% relative humidity per DIN 50015.
