Dold 230V DIN Rail Remote Switch Control Station Switch

Voir l’ensemble des Circuit Trips

Sous-total (1 unité)*

99,19 €

(TVA exclue)

120,02 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Commandes ci-dessous 75,00 € coût (TVA exclue) 5,95 €.
En stock
  • 2 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +99,19 €

*Prix donné à titre indicatif

N° de stock RS:
240-9263
Référence fabricant:
IK8805.01 AC50Hz 230V
Fabricant:
Dold
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Dold

Product Type

Control Station Switch

Current Rating

16 A

Series

IK 8805

Sub Type

Remote Switch

Mount Type

DIN Rail

Standards/Approvals

CE, IEC/EN 60 669

Control Voltage

230V

Pays d'origine :
DE

IK8805 - Remote switch for central circuit


The IK8805 remote switch can be used to implement central circuits with which several load groups can be switched on and off from a central position.

Push-button action

Switch position indication

Optional contact assignments 1 NO or 1 CO

Compact design: 17.5 mm overall width

Design and function


This centrally switchable remote switch operates on the principle of the acceleration relay. After a pulse is applied to the electromagnet, the contact system changes over and retains the switch position until the next pulse follows. Depending on the device version, a group with multiple loads can be switched off with this remote switch. Each load group requires a remote switch, which can be actuated via both an external switch and a central switch. If remote switches are combined into a central circuit, any number of load groups can be centrally switched on and off.

The red indicator on the front side of the device is visible if contacts 13 → 14 or 11 → 14 are closed.

Note


The IK8805 remote switch is designed for pulse operation!

When a central circuit is being constructed, it is essential for the IK8805 to be connected to the same phase

The central on and off buttons and the external switch must be connected to the same phase

Schneider Electric Modular Contactors


Low noise a.c. compact modular contactors and accessories are ideal for heating lighting and building service type applications. The units are designed for mounting in control panels or cabinets on symmetrical DIN rail or they may be housed in modular enclosures.

Liens connexes