RS PRO Dzr Copper Alloy Bs En 12420 Cw602N Compression BS EN 10226- 2 Double Check Valve 15 mm, 10 bar
- N° de stock RS:
- 242-2818
- Fabricant:
- RS PRO
Sous-total (1 unité)*
11,66 €
(TVA exclue)
14,11 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 46 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 11,66 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 242-2818
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Sub Type | Double | |
| Inlet Connection Type | Compression | |
| Product Type | Check Valve | |
| Inlet Port Size | 15 mm | |
| Body Material | Dzr Copper Alloy Bs En 12420 Cw602N | |
| Maximum Operating Pressure | 10 bar | |
| Inlet Thread Standard | BS EN 10226- 2 | |
| Outlet Thread Standard | No | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | BS EN 13959, WRAS Approved | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Sub Type Double | ||
Inlet Connection Type Compression | ||
Product Type Check Valve | ||
Inlet Port Size 15 mm | ||
Body Material Dzr Copper Alloy Bs En 12420 Cw602N | ||
Maximum Operating Pressure 10 bar | ||
Inlet Thread Standard BS EN 10226- 2 | ||
Outlet Thread Standard No | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals BS EN 13959, WRAS Approved | ||
Statut RoHS : Exempté
- Pays d'origine :
- CN
RS PRO Double Check Valves
Use RS PRO check valves as a preventative measure to protect water supplies from contamination. Once installed check valve prevents backflow and back-siphonage contamination thanks to the double valve design that offers a failsafe backup should one of the valves fail.
Why would you choose these check valves?
Our double check valves are made from a copper alloy and available in various thread sizes. The smaller-sized check valves are commonly used with domestic applications and installed close to water outlets such as taps, basin taps, showers, and toilets. In contrast, the largest operating in the main cold-water supply in commercial applications.
Features and Benefits
Specification
Technical Data
Installation
RS PRO checks valves are very simple to install via two joints. The flow through the valves must follow the direction arrow on the valve body.
Applications
FAQ’s
Q: Should check valves be vertical or horizontal?
A: A horizontal installation should always be the preferred choice
Q: Can you put two check valves together?
A: By design, double check valves are technically two single check valves combined. It provides a backup should one of the valves malfunction.
Liens connexes
- RS PRO Dzr Copper Alloy Bs En 12420 Cw602N Screw BS EN 10226 Double Check Valve, 10 bar
- RS PRO Dzr Copper Alloy Bs En 12420 Cw602N Compression Compression Non-Controllable Check Valve, 10 bar
- RS PRO Dzr Copper Alloy Bs En 12420 Cw602N Double Check Valve 28 mm (Compression), 10 bar
- RS PRO Dzr Copper Alloy Bs En 12420 Cw602N Double Check Valve 15 mm (Compression), 10 bar
- RS PRO Dzr Copper Alloy Bs En 12420 Cw602N Single Check Valve 28 mm, 10 bar
- RS PRO Dzr Alloy Bs En 12165 Cw602N Threaded Threaded BS EN 10226 Single Check Valve 2 in, 10 bar
- RS PRO Dzr Alloy Bs En 12165 Cw602N Threaded BS BS EN 10226 Single Check Valve 1-1/4 in, 10 bar
- RS PRO Dzr Copper Alloy Bs En 12420 Cw602N Double Check Valve 3/4 in F x F BSP, 10 bar