onsemi, CAN Transceiver 5 Mbps, 8-Pin DFNW
- N° de stock RS:
- 205-2443
- Référence fabricant:
- NCV7344MW0R2G
- Fabricant:
- onsemi
Sous-total (1 bobine de 3000 unités)*
1 071,00 €
(TVA exclue)
1 296,00 €
(TVA incluse)
Ajouter 3000 unités pour bénéficier d'une livraison gratuite
Temporairement en rupture de stock
- Expédition à partir du 13 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 3000 + | 0,357 € | 1 071,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 205-2443
- Référence fabricant:
- NCV7344MW0R2G
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Product Type | CAN Transceiver | |
| Maximum Data Rate | 5Mbps | |
| Number of Transceivers | 1 | |
| Sub Type | CAN Transceiver | |
| Power Down Mode | Shutdown | |
| Supply Current | 45mA | |
| Package Type | DFNW | |
| Interface Type | CAN | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 4.75V | |
| Maximum Supply Voltage | 5.25V | |
| Minimum Operating Temperature | -40°C | |
| ESD Protection | Yes | |
| Maximum Operating Temperature | 150°C | |
| Height | 0.9mm | |
| Width | 3.05 mm | |
| Length | 3.05mm | |
| Series | NCV7344 | |
| Standards/Approvals | No | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Product Type CAN Transceiver | ||
Maximum Data Rate 5Mbps | ||
Number of Transceivers 1 | ||
Sub Type CAN Transceiver | ||
Power Down Mode Shutdown | ||
Supply Current 45mA | ||
Package Type DFNW | ||
Interface Type CAN | ||
Pin Count 8 | ||
Minimum Supply Voltage 4.75V | ||
Maximum Supply Voltage 5.25V | ||
Minimum Operating Temperature -40°C | ||
ESD Protection Yes | ||
Maximum Operating Temperature 150°C | ||
Height 0.9mm | ||
Width 3.05 mm | ||
Length 3.05mm | ||
Series NCV7344 | ||
Standards/Approvals No | ||
Automotive Standard AEC-Q100 | ||
The ON Semiconductor high speed low power CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus. This provides differential transmit capability to the bus and differential receive capability to the CAN controller. It has additional timing parameters to ensure robust communication at data rates beyond 1Mbps to cope with CAN flexible data rate requirements (CAN FD). These features make the NCV7344 an excellent choice for all types of HS-CAN networks, in nodes that require a low-power mode with wake-up capability via the CAN bus.
Very low current standby mode with wake-up via the bus
Low electromagnetic emission (EME) and high electromagnetic immunity
Very low EME without common-mode (CM) choke
No disturbance of the Bus lines with an un-powered Node
Transmit data (TxD) dominant timeout function
Under all supply conditions the chip behaves predictably
Very high ESD robustness of bus pins, >8kV System ESD pulses
Thermal protection