Microchip, CAN Controller 1 Mbps, 28-Pin QFN
- N° de stock RS:
- 177-3171P
- Référence fabricant:
- MCP25625T-E/ML
- Fabricant:
- Microchip
Sous-total 5 unités (conditionné en bande continue)*
15,24 €
(TVA exclue)
18,44 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Dernier stock RS
- 2 630 dernière(s) unité(s), prête(s) à l'envoi d'un autre centre de distribution
Unité | Prix par unité |
|---|---|
| 5 + | 3,048 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 177-3171P
- Référence fabricant:
- MCP25625T-E/ML
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Maximum Data Rate | 1Mbps | |
| Product Type | CAN Controller | |
| Number of Transceivers | 1 | |
| Sub Type | CAN Controller | |
| Power Down Mode | Standby, Sleep | |
| Supply Current | 10mA | |
| Mount Type | Surface | |
| Interface Type | CAN 2.0B | |
| Package Type | QFN | |
| Pin Count | 28 | |
| Minimum Supply Voltage | 2.7V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| ESD Protection | Yes | |
| Maximum Operating Temperature | 125°C | |
| Series | MCP25625 | |
| Standards/Approvals | No | |
| Height | 0.92mm | |
| Length | 6mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Maximum Data Rate 1Mbps | ||
Product Type CAN Controller | ||
Number of Transceivers 1 | ||
Sub Type CAN Controller | ||
Power Down Mode Standby, Sleep | ||
Supply Current 10mA | ||
Mount Type Surface | ||
Interface Type CAN 2.0B | ||
Package Type QFN | ||
Pin Count 28 | ||
Minimum Supply Voltage 2.7V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
ESD Protection Yes | ||
Maximum Operating Temperature 125°C | ||
Series MCP25625 | ||
Standards/Approvals No | ||
Height 0.92mm | ||
Length 6mm | ||
Automotive Standard No | ||
The MCP25625 is a complete, cost-effective and small-footprint CAN solution that can be easily added to a microcontroller with an available SPI interface. The MCP25625 interfaces directly with microcontrollers operating at 2.7V to 5.5V, there are no external level shifters required. In addition, the MCP25625 connects directly to the physical CAN bus, supporting all requirements for CAN high-speed transceivers.
Stand-Alone CAN2.0B Controller with Integrated CAN Transceiver and Serial Peripheral Interface (SPI)
Up to 1 Mb/s Operation
Very Low Standby Current (10 μA, typical).
Up to 10 MHz SPI Clock Speed
Interfaces Directly with Microcontrollers with 2.7V to 5.5V I/O
Available in SSOP-28L and 6x6 QFN-28L
Temperature Ranges:
Extended (E): -40°C to +125°C