Microchip MCP2562-H/MF, CAN Transceiver 1 Mbps, 8-Pin DFN
- N° de stock RS:
- 177-1930
- Référence fabricant:
- MCP2562-H/MF
- Fabricant:
- Microchip
Sous-total (1 paquet de 10 unités)*
13,69 €
(TVA exclue)
16,56 €
(TVA incluse)
Ajouter 60 unités pour bénéficier d'une livraison gratuite
Temporairement en rupture de stock
- Expédition à partir du 10 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 1,369 € | 13,69 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 177-1930
- Référence fabricant:
- MCP2562-H/MF
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Maximum Data Rate | 1Mbps | |
| Product Type | CAN Transceiver | |
| Number of Transceivers | 1 | |
| Sub Type | CAN Transceiver | |
| Power Down Mode | Standby, Normal | |
| Supply Current | 70mA | |
| Mount Type | Surface | |
| Interface Type | ISO 11898-5, ISO 11898-2 | |
| Package Type | DFN | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| ESD Protection | Yes | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Height | 0.95mm | |
| Width | 3 mm | |
| Series | MCP2562 | |
| Standards/Approvals | No | |
| Length | 3mm | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Maximum Data Rate 1Mbps | ||
Product Type CAN Transceiver | ||
Number of Transceivers 1 | ||
Sub Type CAN Transceiver | ||
Power Down Mode Standby, Normal | ||
Supply Current 70mA | ||
Mount Type Surface | ||
Interface Type ISO 11898-5, ISO 11898-2 | ||
Package Type DFN | ||
Pin Count 8 | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
ESD Protection Yes | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Height 0.95mm | ||
Width 3 mm | ||
Series MCP2562 | ||
Standards/Approvals No | ||
Length 3mm | ||
Automotive Standard AEC-Q100 | ||
- Pays d'origine :
- TH
The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device family members are: • MCP2561 with SPLIT pin • MCP2562 with VIO pin
Supports 1 Mb/s operation
Implements ISO-11898-5 standard physical layer requirements
Very low standby current (Typ: 5μA)
VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O
SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes
CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus
Detection of ground fault, Permanent dominant detection on TXD, Permanent dominant detection on bus
Power-on Reset and voltage brown-out protectionon VDD and VIO pin
Liens connexes
- Microchip MCP2562-E/MF ISO 11898-5, 8-Pin DFN
- Microchip MCP2562-H/MF ISO 11898-5, 8-Pin DFN
- Microchip MCP2561-E/MF ISO 11898-5, 8-Pin DFN
- Microchip MCP2561FD-E/MF ISO 11898-5, 8-Pin DFN
- Microchip MCP2562FD-E/MF ISO 11898-5, 8-Pin DFN
- Microchip MCP2562FDT-E/MF 8-Pin DFN
- Microchip MCP2562T-E/MF 8-Pin DFN
- Microchip MCP2561T-E/MF 8-Pin DFN