Microchip MCP2562FD-H/SN, CAN Transceiver 8 Mbps, 8-Pin SOIC
- N° de stock RS:
- 177-1916
- Référence fabricant:
- MCP2562FD-H/SN
- Fabricant:
- Microchip
Offre groupée disponible
Sous-total (1 paquet de 10 unités)*
12,12 €
(TVA exclue)
14,67 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 50 unité(s) expédiée(s) à partir du 02 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 - 20 | 1,212 € | 12,12 € |
| 30 + | 1,17 € | 11,70 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 177-1916
- Référence fabricant:
- MCP2562FD-H/SN
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | CAN Transceiver | |
| Maximum Data Rate | 8Mbps | |
| Number of Transceivers | 1 | |
| Sub Type | CAN Transceiver | |
| Power Down Mode | Normal, Standby | |
| Supply Current | 70mA | |
| Mount Type | Surface | |
| Interface Type | ISO 11898-2, ISO 11898-5 | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| ESD Protection | Yes | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Height | 1.5mm | |
| Width | 3.9 mm | |
| Length | 4.9mm | |
| Standards/Approvals | RoHS | |
| Series | MCP2562FD | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type CAN Transceiver | ||
Maximum Data Rate 8Mbps | ||
Number of Transceivers 1 | ||
Sub Type CAN Transceiver | ||
Power Down Mode Normal, Standby | ||
Supply Current 70mA | ||
Mount Type Surface | ||
Interface Type ISO 11898-2, ISO 11898-5 | ||
Package Type SOIC | ||
Pin Count 8 | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
ESD Protection Yes | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Height 1.5mm | ||
Width 3.9 mm | ||
Length 4.9mm | ||
Standards/Approvals RoHS | ||
Series MCP2562FD | ||
Automotive Standard AEC-Q100 | ||
- Pays d'origine :
- TH
The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device family members are: • MCP2561 with SPLIT pin • MCP2562 with VIO pin
Supports 1 Mb/s operation
Implements ISO-11898-5 standard physical layer requirements
Very low standby current (Typ: 5μA)
VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O
SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes
CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus
Detection of ground fault, Permanent dominant detection on TXD, Permanent dominant detection on bus
Power-on Reset and voltage brown-out protectionon VDD and VIO pin
Liens connexes
- Microchip MCP2562FD-H/SN ISO 11898-5, 8-Pin SOIC
- Microchip MCP2562FD-E/SN ISO 11898-5, 8-Pin SOIC
- Microchip MCP2561FD-E/SN ISO 11898-5, 8-Pin SOIC
- Microchip MCP2542FD-E/SN ISO 11898-2 ISO/DIS11898-2, 8-Pin SOIC
- Microchip MCP2544FD-E/SN 8-Pin DFN
- Microchip MCP2562FD-E/MF ISO 11898-5, 8-Pin DFN
- Microchip MCP2562FD-E/P ISO 11898-5, 8-Pin PDIP
- Microchip MCP2562T-E/SN ISO 11898-5, 8-Pin SOIC