Name: Energizer A76 Button Battery, 1.5 V, 11.6 mm Diameter, 2 Pack
Brand: Energizer
SKU: 683-377
Price: 1.37 EUR
Availability: InStock

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Energizer
	Battery Size	A76
	Product Type	Button Battery
	Chemistry	Manganese Dioxide
	Nominal Voltage	1.5V
	Battery Capacity	175mAh
	Diameter	11.6mm
	Number of Batteries	2
	Termination Type	Flat Contact
	NEDA Code	1166 A
	Weight	1.85g
	Standards/Approvals	No
	IEC Code	Iec-Lr44

	Sélectionner tout
	Marque Energizer
	Battery Size A76
	Product Type Button Battery
	Chemistry Manganese Dioxide
	Nominal Voltage 1.5V
	Battery Capacity 175mAh
	Diameter 11.6mm
	Number of Batteries 2
	Termination Type Flat Contact
	NEDA Code 1166 A
	Weight 1.85g
	Standards/Approvals No
	IEC Code Iec-Lr44

Datasheet - Lr44 p2

Statut RoHS : Exempté

Pays d'origine :: CN

Energizer Button Battery, 1.5V Nominal Voltage, 175mAh Capacity - 7638900083071

This button battery is a small 1.5V coin cell designed to supply portable electronic devices that require compact, steady power. It uses a manganese dioxide chemical system and is intended for applications that demand continuous low-drain operation with occasional high-rate pulses. The pack contains two cells and is suited to items where long service life at light loads is important.

Features and Benefits:

• 175mAh capacity provides extended runtime under light loads
• 1.5V nominal output maintains stable voltage for electronics
• Flat contact termination enables simple device installation
• Low impedance (5-15Ω at 40Hz) supports Pulse currents
• Typical weight 1.85g minimises added device mass

Applications

• Suitable for watches and small timing devices
• Suitable for handheld calculators and remote controls
• Used with small toys requiring Compact power sources
• Used for medical instruments with low continuous drain
• Can be used for LED indicators and small sensors

How long will the cell operate under continuous light load?

At a continuous drain of 0.191mA (6.8KΩ load) it provides about 915 hours to 0.9V.

What happens to the cell as it discharges?

The cell may bulge during discharge but will not exceed its specified maximum height.

How is capacity measured for these cells?

Capacity is determined at 21°C using a 6.8KΩ continuous drain until cut‑off at 0.9V.

What is the typical internal impedance and its significance?

Measured at 40Hz, impedance ranges 5-15Ω which allows brief high-rate pulses while supplying low-drain devices.

What form factor and chemistry should be expected?

The cells use a manganese dioxide system in a miniature coin format with flat contacts for installation.

Energizer A76 Button Battery, 1.5 V, 11.6 mm Diameter, 2 Pack

Frais de livraison offerts pour toute commande de plus de 90,00 €