ETA Busbar, 24V dc, 59.5mm Pitch

Voir l’ensemble des Busbars

Sous-total (1 paquet de 10 unités)*

63,49 €

(TVA exclue)

76,82 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Temporairement en rupture de stock
  • Expédition à partir du 16 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
le paquet*
10 +6,349 €63,49 €

*Prix donné à titre indicatif

N° de stock RS:
723-4875
Référence fabricant:
X222.611.59 BUSBAR (PACK OF 10)
Fabricant:
ETA
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

ETA

Rated Operational Voltage

24V dc

Pitch

59.5mm

Series

X222.611

For Use With

ESX10-T

Pays d'origine :
DE

ESX10-T Electronic Circuit Protectors


Electronic circuit protector type ESX10-T is designed to ensure selective disconnection of DC24V load systems. By active current limitation, ESX10-T responds much faster to overload or short circuit conditions than switch-mode power supply. The ESX10-T limits the highest possible current to 1.3 to 1.8 times the selected rated current of the circuit protector. It is therefore possible to switch on capacitive loads of up to 20,000μF, but they are disconnected only in the event of an overload or short circuit.

Selective load protection, electronic trip characteristics
Reliable overload disconnection with 1.1 x lN plus, even with long load lines or small cable cross sections
Manual ON/OFF button (S1)
Status and failure indication through LED, status output SF or Si contact F
Integral fail-safe element adjusted to current rating
Can be snapped onto symmetrical rails for ease of installation and space-saving in control cabinets
Ease of wiring through busbar LINE+ and 0 V as well as signal bars and bridges

Approvals

UL, CSA

Approvals

UL, CSA

Liens connexes