ROHM Non-Inverting CMOS Buffer, 5-Pin SSOP-5
- N° de stock RS:
- 240-3979
- Référence fabricant:
- BD7LS125G-CTL
- Fabricant:
- ROHM
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 240-3979
- Référence fabricant:
- BD7LS125G-CTL
- Fabricant:
- ROHM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ROHM | |
| Product Type | Buffer | |
| Logic Family | CMOS | |
| Logic Function | Buffer | |
| Number of Channels | 1 | |
| Schmitt Trigger Input | No | |
| Input Type | CMOS | |
| Mount Type | PCB | |
| Output Type | CMOS | |
| Polarity | Non-Inverting | |
| Package Type | SSOP-5 | |
| Minimum Supply Voltage | 1.65V | |
| Maximum Supply Voltage | 5.5V | |
| Pin Count | 5 | |
| Maximum High Level Output Current | 24mA | |
| Maximum Propagation Delay Time @ CL | 10ns | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Maximum Low Level Output Current | 24mA | |
| Length | 2.9mm | |
| Standards/Approvals | RoHS | |
| Height | 2.8mm | |
| Series | BD7LS07G | |
| Supply Current | 10μA | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque ROHM | ||
Product Type Buffer | ||
Logic Family CMOS | ||
Logic Function Buffer | ||
Number of Channels 1 | ||
Schmitt Trigger Input No | ||
Input Type CMOS | ||
Mount Type PCB | ||
Output Type CMOS | ||
Polarity Non-Inverting | ||
Package Type SSOP-5 | ||
Minimum Supply Voltage 1.65V | ||
Maximum Supply Voltage 5.5V | ||
Pin Count 5 | ||
Maximum High Level Output Current 24mA | ||
Maximum Propagation Delay Time @ CL 10ns | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Maximum Low Level Output Current 24mA | ||
Length 2.9mm | ||
Standards/Approvals RoHS | ||
Height 2.8mm | ||
Series BD7LS07G | ||
Supply Current 10μA | ||
Automotive Standard AEC-Q100 | ||
The ROHM single 3-state buffer is qualified for automotive applications. This is designed for 1.65 V to 5.5 V power supply voltage operation. When it is power down, the Output Tolerant circuit protects the output circuit from the back flow current through the connected system.
Low power consumption
5.5 V tolerant inputs
Output tolerant supports partial power down mode operation