Toshiba Non-Inverting 3 State Octal Bus Buffer, 14-Pin TSSOP
- N° de stock RS:
- 171-3316
- Référence fabricant:
- 74VHC126FT
- Fabricant:
- Toshiba
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 171-3316
- Référence fabricant:
- 74VHC126FT
- Fabricant:
- Toshiba
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Toshiba | |
| Logic Family | 74VHC | |
| Product Type | Octal Bus Buffer | |
| Logic Function | Buffer | |
| Schmitt Trigger Input | No | |
| Input Type | CMOS | |
| Output Type | 3 State | |
| Mount Type | Surface | |
| Polarity | Non-Inverting | |
| Minimum Supply Voltage | 2V | |
| Package Type | TSSOP | |
| Pin Count | 14 | |
| Maximum Supply Voltage | 5.5V | |
| Maximum Propagation Delay Time @ CL | 3.8ns | |
| Maximum High Level Output Current | -8mA | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Maximum Low Level Output Current | 8mA | |
| Height | 1mm | |
| Series | 74VHC | |
| Standards/Approvals | No | |
| Width | 4.4 mm | |
| Length | 5mm | |
| Supply Current | 4μA | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque Toshiba | ||
Logic Family 74VHC | ||
Product Type Octal Bus Buffer | ||
Logic Function Buffer | ||
Schmitt Trigger Input No | ||
Input Type CMOS | ||
Output Type 3 State | ||
Mount Type Surface | ||
Polarity Non-Inverting | ||
Minimum Supply Voltage 2V | ||
Package Type TSSOP | ||
Pin Count 14 | ||
Maximum Supply Voltage 5.5V | ||
Maximum Propagation Delay Time @ CL 3.8ns | ||
Maximum High Level Output Current -8mA | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Maximum Low Level Output Current 8mA | ||
Height 1mm | ||
Series 74VHC | ||
Standards/Approvals No | ||
Width 4.4 mm | ||
Length 5mm | ||
Supply Current 4μA | ||
Automotive Standard AEC-Q100 | ||
The 74VHC125FT,74VHC126FT are high speed CMOS QUAD BUS BUFFERs fabricated with silicon gate C2MOS technology. They achieve the high speed operation similar to equivalent Bipolar Shottky TTL while maintaining the CMOS low power dissipation. The 74VHC125FT requires the 3-state control input G to be set high to place the output into the high impedance state, whereas the 74VHC126FT requires the control input G to be set low to place the output into high impedance. An input protection circuit ensures that 0 to 5.5 V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5 V to 3 V systems and two supply systems such as battery back up This circuit prevents device destruction due to mismatched supply and input voltages
Wide operating temperature: Topr = -40 to 125
High speed: Propagation delay time = 3.8 ns (typ.) at VCC = 5.0 V
Low power dissipation: ICC = 2.0 μA (max) at Ta = 25
High noise immunity: VNIH = VNIL = 28 % VCC (min)
Power-down protection is provided on all inputs.
Balanced propagation delays: tPLH ≈ tPHL
Wide operating voltage range: VCC(opr) = 2.0 to 5.5 V
Low noise: V = 0.8 V (max)
Liens connexes
- Toshiba 74VHC126FT Octal Bus Buffer, 14-Pin TSSOP
- Toshiba 74VHCT126AFT Quad Bus Buffer, 14-Pin TSSOP
- Toshiba 74VHCT125AFT Quad Bus Buffer, 14-Pin TSSOP
- Toshiba 74LCX240FT Quad Bus Buffer, 20-Pin TSSOP
- Toshiba 74HC125D Quad Bus Buffer, 14-Pin SOIC
- Toshiba 74HC126D Quad Bus Buffer, 14-Pin SOIC
- Toshiba 74VHCT125AFT Octal Bus Buffer, 14-Pin TSSOP
- Toshiba 74VHCT126AFT Octal Bus Buffer, 14-Pin TSSOP