RS Better World
INA Bearing Insert 35 mm ID 72 mm OD 207-XL-NPP-B
- N° de stock RS:
- 260-0130
- Référence fabricant:
- 207-XL-NPP-B
- Fabricant:
- INA
Sous-total (1 unité)*
34,48 €
(TVA exclue)
41,72 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 3 unité(s) expédiée(s) à partir du 28 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 34,48 € |
*Prix donné à titre indicatif
Notre gamme de produits Better World vous facilite l'accès à des produits plus durables et plus fiables.
En savoir plus sur les produits RS Better World
- N° de stock RS:
- 260-0130
- Référence fabricant:
- 207-XL-NPP-B
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Inside Diameter | 35mm | |
| Product Type | Bearing Insert | |
| Outside Diameter | 72mm | |
| Material | Stainless Steel | |
| Static Load Rating | 15.3N | |
| Dynamic Load Rating | 27500N | |
| End Type | Open | |
| Overall Width | 17mm | |
| Bore Type | Deep Groove | |
| Standards/Approvals | No | |
| Series | 207-XL-NPP-B | |
| Better World Product | Yes | |
| Better World Claim | Extended Product Life, Saves Energy | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Inside Diameter 35mm | ||
Product Type Bearing Insert | ||
Outside Diameter 72mm | ||
Material Stainless Steel | ||
Static Load Rating 15.3N | ||
Dynamic Load Rating 27500N | ||
End Type Open | ||
Overall Width 17mm | ||
Bore Type Deep Groove | ||
Standards/Approvals No | ||
Series 207-XL-NPP-B | ||
Better World Product Yes | ||
Better World Claim Extended Product Life, Saves Energy | ||
Schaeffler 207-XL-NPP-B Series Bearing Insert, 35mm Inside Diameter, 72mm Outside Diameter - 207-XL-NPP-B
This bearing insert is a stainless steel component designed to support rotational shafts within machinery where a deep-groove configuration is required. It operates as an open-ended insert suited for installations that need Durable contact between housing and shaft, providing controlled dynamic response under load in industrial contexts.
Features and Benefits:
• Deep-groove design provides stable radial load handling
• Stainless steel construction resists wear in demanding environments
• Dynamic capacity of 27,500 N supports high operational loads
• Static load allowance of 15.3 N minimises displacement under stationary loads
• Open end format enables straightforward shaft insertion and maintenance
• Stainless steel construction resists wear in demanding environments
• Dynamic capacity of 27,500 N supports high operational loads
• Static load allowance of 15.3 N minimises displacement under stationary loads
• Open end format enables straightforward shaft insertion and maintenance
Applications
• Suitable for conveyor drive shaft assemblies in factories
• Used for gearboxes requiring robust radial bearings
• Ideal for rotating rollers in material-handling systems
• Can be used for pump shaft support in industrial plants
• Used for gearboxes requiring robust radial bearings
• Ideal for rotating rollers in material-handling systems
• Can be used for pump shaft support in industrial plants
What internal bore sizing should I expect for shaft selection?
The insert accepts a 35 mm internal shaft diameter allowing direct fitment without additional adaptors.
How does the outside diameter affect housing design?
The housing should accommodate a 72 mm outside diameter to ensure correct seating and load distribution.
What width should the housing clearance allow for axial stability?
Provision for a 17 mm overall width is required to maintain axial alignment and correct bearing engagement.
How does the open end format influence assembly access?
The open end permits axial insertion of the shaft and simplifies removal for routine inspection or replacement.
Liens connexes
- INA Bearing Insert 35 mm ID 72 mm OD GRAE35-XL-NPP-B
- INA Spherical Bearing 35 mm ID 72 mm OD RAE35-XL-NPP-B
- INA Bearing Unit Insert 35 mm ID 72 mm OD RAE35-XL-NPP-FA106
- INA Bearing Insert 35 mm ID 72 mm OD 207-XL-KRR-AH03
- INA Bearing Insert 35 mm ID 72 mm OD GSH35-XL-2RSR-B
- INA Bearing Insert 35 mm ID 72 mm OD GE35-XL-KTT-B
- INA Bearing Insert 35 mm ID 72 mm OD GLE35-XL-KRR-B
- INA Bearing Insert 40 mm ID 80 mm OD RAE40-XL-NPP-B