RS Better World
INA Bearing Insert 17 mm ID 40 mm OD 203-XL-KRR
- N° de stock RS:
- 260-0125
- Référence fabricant:
- 203-XL-KRR
- Fabricant:
- INA
Sous-total (1 unité)*
25,58 €
(TVA exclue)
30,95 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 8 unité(s) expédiée(s) à partir du 19 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 25,58 € |
*Prix donné à titre indicatif
Notre gamme de produits Better World vous facilite l'accès à des produits plus durables et plus fiables.
En savoir plus sur les produits RS Better World
- N° de stock RS:
- 260-0125
- Référence fabricant:
- 203-XL-KRR
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Inside Diameter | 17mm | |
| Product Type | Bearing Insert | |
| Outside Diameter | 40mm | |
| Static Load Rating | 4.75N | |
| Dynamic Load Rating | 9.8N | |
| End Type | Open | |
| Overall Width | 18.3mm | |
| Standards/Approvals | No | |
| Series | 203-XL-KRR | |
| Better World Claim | Extended Product Life, Saves Energy | |
| Better World Product | Yes | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Inside Diameter 17mm | ||
Product Type Bearing Insert | ||
Outside Diameter 40mm | ||
Static Load Rating 4.75N | ||
Dynamic Load Rating 9.8N | ||
End Type Open | ||
Overall Width 18.3mm | ||
Standards/Approvals No | ||
Series 203-XL-KRR | ||
Better World Claim Extended Product Life, Saves Energy | ||
Better World Product Yes | ||
Statut RoHS : Exempté
Schaeffler 203-XL-KRR Series Bearing Insert, 17mm Inside Diameter, 40mm Outside Diameter - 203-XL-KRR
This bearing insert is designed to provide supported rotational movement within assemblies where compact, metric inserts are required. It is intended for installations that need a sealed insert bearing configuration offering defined static and dynamic load capacities while maintaining an economical overall footprint.
Features and Benefits:
• 4.75N static load rating reduces deformation under stationary loads
• 9.8N dynamic load capacity supports continuous rotating loads
• Sealed construction limits contamination ingress during operation
• Robust performance for repeated start-stop duty cycles
• 9.8N dynamic load capacity supports continuous rotating loads
• Sealed construction limits contamination ingress during operation
• Robust performance for repeated start-stop duty cycles
Applications
• Suitable for small electric motor shaft support
• Used with gearbox idler shafts in Compact drives
• Ideal for conveyor roller pivot points in light systems
• Can be used for agricultural sensor pivot mechanisms
• Used with gearbox idler shafts in Compact drives
• Ideal for conveyor roller pivot points in light systems
• Can be used for agricultural sensor pivot mechanisms
What shaft size does it accept?
It is compatible with a 17mm internal bore to fit corresponding shafts.
How does the insert integrate into housings?
The outer dimension of 40mm allows press-fit into metric housings designed for that outer diameter.
What overall width is required for installation depth?
The component occupies 18.3mm of axial space, informing housing depth requirements.
Which load condition is critical for static applications?
The 4.75N static capacity defines the maximum stationary radial load before increased deformation occurs.
How does dynamic loading affect selection?
The 9.8N dynamic rating should be used to assess running load limits for continuous rotation.
Liens connexes
- INA Bearing Insert 16.2 mm ID 40 mm OD 203-XL-KRR-AH02
- INA Bearing Insert 40 mm ID 80 mm OD GLE40-XL-KRR-B
- INA Bearing Insert 40 mm ID 90 mm OD GNE40-XL-KRR-B
- INA Bearing Insert 40 mm ID 80 mm OD GE40-XL-KRR-B
- INA Bearing Insert 40 mm ID 80 mm OD GYE40-XL-KRR-B
- INA Bearing Insert 20 mm ID 47 mm OD 204-XL-KRR
- INA Bearing Insert 30 mm ID 62 mm OD GLE30-XL-KRR-B
- INA Bearing Insert 25 mm ID 52 mm OD GLE25-XL-KRR-B