SKF Bearing Insert 30 mm ID 62 mm OD 1726206-2RS1
- N° de stock RS:
- 209-1871
- Référence fabricant:
- 1726206-2RS1
- Fabricant:
- SKF
Sous-total (1 unité)*
25,35 €
(TVA exclue)
30,67 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 25,35 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 209-1871
- Référence fabricant:
- 1726206-2RS1
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 30mm | |
| Product Type | Bearing Insert | |
| Outside Diameter | 62mm | |
| Material | Steel | |
| Static Load Rating | 11.2kN | |
| Dynamic Load Rating | 19.5kN | |
| End Type | Sealed | |
| Series | 1726206 | |
| Bore Type | Cylindrical | |
| Overall Width | 16mm | |
| Standards/Approvals | No | |
| Limiting Speed | 7500rpm | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 30mm | ||
Product Type Bearing Insert | ||
Outside Diameter 62mm | ||
Material Steel | ||
Static Load Rating 11.2kN | ||
Dynamic Load Rating 19.5kN | ||
End Type Sealed | ||
Series 1726206 | ||
Bore Type Cylindrical | ||
Overall Width 16mm | ||
Standards/Approvals No | ||
Limiting Speed 7500rpm | ||
- Pays d'origine :
- IT
SKF 1726206 Series Bearing Insert, 30mm Inside Diameter, 62mm Outside Diameter - 1726206-2RS1
This bearing insert is a sealed steel insert designed to support rotating shafts in industrial equipment. It provides a compact, cylindrical-bore solution for applications requiring contained lubrication and protection from contaminants, enabling smooth operation within mechanical assemblies.
Features & Benefits
• 19.5 kN dynamic capacity provides sustained radial load handling
• 11.2 kN static rating resists heavy static forces
• Sealed end construction reduces ingress and maintenance needs
• Rated for 7,500 r/min supports higher-speed rotating systems
• Steel construction delivers mechanical robustness and wear resistance
• 11.2 kN static rating resists heavy static forces
• Sealed end construction reduces ingress and maintenance needs
• Rated for 7,500 r/min supports higher-speed rotating systems
• Steel construction delivers mechanical robustness and wear resistance
**Applications**
• Suitable for mounting in automation drive modules
• Ideal for motors and gearboxes in electrical drives
• Used with conveyor shaft supports in manufacturing lines
• Can be used for rotating assemblies in electronics manufacturing
• Used for bearing housings in mechanical handling equipment
• Ideal for motors and gearboxes in electrical drives
• Used with conveyor shaft supports in manufacturing lines
• Can be used for rotating assemblies in electronics manufacturing
• Used for bearing housings in mechanical handling equipment
What internal clearance and ring type are used for assembly fit?
The insert uses standard internal radial clearance with a conventional inner ring intended for cylindrical shafts, accommodating common shaft tolerances for press-fit or locating mounts.
What are the mass and handling considerations for installation?
Each unit weighs 0.19kg, permitting straightforward manual fitting and reducing the need for specialised lifting tools during assembly.
How does the bearing perform under repeated fatigue loading?
The fatigue endurance limit is specified by a fatigue load limit of 0.475 kN, indicating the sustained alternating load level for long-life applications.
Are there complementary accessories for seating and retention?
A rubber seating ring variant is listed as an associated product for use where additional housing sealing or axial support is required.
Liens connexes
- SKF Bearing Insert 30 mm ID 72 mm OD 1726306-2RS1
- SKF 6206-2RS1 1 Row Ball Bearing - 30 mm ID, 62 mm OD
- SKF 62206-2RS1 1 Row Ball Bearing - 30 mm ID, 62 mm OD
- SKF Ball Bearing 25 mm ID 62 mm OD 1726305-2RS1
- SKF Bearing Insert 30 mm ID 62 mm OD YET 206
- SKF Bearing Insert 30 mm ID 62 mm OD YAT 206
- SKF 6206-2RS1/C3 1 Row Ball Bearing - 30 mm ID, 62 mm OD
- SKF 6206-2RS1/C4 1 Row Ball Bearing - 30 mm ID, 62 mm OD