INA Bearing Insert 45 mm ID 85 mm OD GLE45-XL-KRR-B
- N° de stock RS:
- 194-6885
- Référence fabricant:
- GLE45-XL-KRR-B
- Fabricant:
- INA
Offre groupée disponible
Sous-total (1 unité)*
99,73 €
(TVA exclue)
120,67 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 13 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 99,73 € |
| 5 - 9 | 93,84 € |
| 10 - 24 | 91,93 € |
| 25 + | 89,95 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 194-6885
- Référence fabricant:
- GLE45-XL-KRR-B
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Bearing Insert | |
| Inside Diameter | 45 mm | |
| Outside Diameter | 85 mm | |
| Static Load Rating | 34.5kN | |
| Dynamic Load Rating | 20.4kN | |
| Standards/Approvals | No | |
| Overall Width | 42.9mm | |
| Bore Type | Round | |
| Series | GE | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Bearing Insert | ||
Inside Diameter 45 mm | ||
Outside Diameter 85 mm | ||
Static Load Rating 34.5kN | ||
Dynamic Load Rating 20.4kN | ||
Standards/Approvals No | ||
Overall Width 42.9mm | ||
Bore Type Round | ||
Series GE | ||
Radial insert ball bearings are ready-to-fit machine elements. In combination with drawn shafts, they are particularly easy to fit and suitable for the design of economical bearing arrangements. They are highly suitable where predominantly radial loads must be supported
Radial insert ball bearings with an extended inner ring undergo less tilting and therefore run more smoothly
Radial insert ball bearings with a spherical outer ring are highly suitable where: Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where: A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where: shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where: Vibrations and shocks must be supported
Damping of running noise is required
Liens connexes
- INA Bearing Unit Insert 45 mm ID 85 mm OD GYE45-XL-KRR-B
- INA Bearing Unit Insert 45 mm ID 85 mm OD GE45-XL-KRR-B
- INA Bearing Insert 25 mm ID 52 mm OD GYE25-XL-KRR-B
- INA Bearing Insert 40 mm ID 80 mm OD GE40-XL-KRR-B
- INA Bearing Insert 25 mm ID 52 mm OD GE25-XL-KRR-B
- INA Bearing Insert 30 mm ID 62 mm OD GE30-XL-KRR-B
- INA Bearing Insert 60 mm ID 110 mm OD GYE60-XL-KRR-B
- INA Bearing Insert 30 mm ID 62 mm OD GYE30-XL-KRR-B