INA Bearing Insert 25 mm ID 52 mm OD GE25-XL-KRR-B
- N° de stock RS:
- 137-1865
- Référence fabricant:
- GE25-XL-KRR-B
- Fabricant:
- INA
Offre groupée disponible
Sous-total (1 unité)*
36,16 €
(TVA exclue)
43,75 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 36,16 € |
| 5 - 9 | 35,12 € |
| 10 - 24 | 34,21 € |
| 25 + | 33,30 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 137-1865
- Référence fabricant:
- GE25-XL-KRR-B
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Bearing Insert | |
| Inside Diameter | 25 mm | |
| Outside Diameter | 52 mm | |
| Static Load Rating | 7.8kN | |
| Dynamic Load Rating | 14.9kN | |
| End Type | Sealed | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Bearing Insert | ||
Inside Diameter 25 mm | ||
Outside Diameter 52 mm | ||
Static Load Rating 7.8kN | ||
Dynamic Load Rating 14.9kN | ||
End Type Sealed | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Radial Insert Ball Bearings with Eccentric Locking Collar
INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation.;The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again.;The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded.;The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage.
Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides.;To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring.;In addition to bearings with a spherical outer ring (GRAE..-NPP-B and GE..-KRR-B), there are also cylindrical (RAE..-NPP and RALE..-NPP)
Features and Benefits
• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise;• Protected against fretting corrosion;• Shaft diameters from 12 mm to 60 mm (RAE..NPP) and (GRAE..-NPP-B);• Shaft diameters from 20 mm to 30 mm (RALE..NPP);• Shaft diameters from 17 mm to 120 mm (GE..-KRR-B)
Suffixes
FA106 - Bearing subjected to special noise testing;B - Bearing with special outer ring;NPP - Lip seals on both sides (P type seal);KRR - Lip seals on both sides (R type seal)
INA
Liens connexes
- INA Bearing Insert 25 mm ID 52 mm OD GE25-XL-KTT-B>A
- INA Bearing Insert 25 mm ID 52 mm OD GYE25-XL-KRR-B
- INA Bearing Insert 25 mm ID 52 mm OD GLE25-XL-KRR-B
- INA Bearing Insert 40 mm ID 80 mm OD GE40-XL-KRR-B
- INA Bearing Insert 30 mm ID 62 mm OD GE30-XL-KRR-B
- INA Bearing Insert 60 mm ID 110 mm OD GYE60-XL-KRR-B
- INA Bearing Insert 30 mm ID 62 mm OD GYE30-XL-KRR-B
- INA Bearing Insert 55 mm ID 100 mm OD GYE55-XL-KRR-B