SKF Bearing Insert 50 mm ID 69.06 mm OD FYJ 55 KF
- N° de stock RS:
- 461-591
- Référence fabricant:
- FYJ 55 KF
- Fabricant:
- SKF
Sous-total (1 unité)*
149,39 €
(TVA exclue)
180,76 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 28 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 149,39 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 461-591
- Référence fabricant:
- FYJ 55 KF
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Bearing Insert | |
| Inside Diameter | 50mm | |
| Outside Diameter | 69.06mm | |
| Material | Cast Iron | |
| Static Load Rating | 29kN | |
| Dynamic Load Rating | 43.6kN | |
| Overall Width | 57.5mm | |
| Bore Type | Tapered | |
| Standards/Approvals | RoHS | |
| Series | FYJ 55 KF | |
| Limiting Speed | 3600rpm | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Bearing Insert | ||
Inside Diameter 50mm | ||
Outside Diameter 69.06mm | ||
Material Cast Iron | ||
Static Load Rating 29kN | ||
Dynamic Load Rating 43.6kN | ||
Overall Width 57.5mm | ||
Bore Type Tapered | ||
Standards/Approvals RoHS | ||
Series FYJ 55 KF | ||
Limiting Speed 3600rpm | ||
- Pays d'origine :
- IT
Akshay
The SKF Square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, locked to the shaft with an adapter sleeve, which enables the bearings to operate at higher speeds and run more smoothly in applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. The adapter sleeve is not included in the unit and should be ordered separately.
Resist high levels of contamination
Designed for high temperatures and speeds
Accommodate relatively heavy loads
Cost-effective
Liens connexes
- SKF Bearing Insert 55 mm ID 69.06 mm OD FY 55 TR
- SKF Bearing Unit Insert 55 mm ID 69.06 mm OD SY 55 TF
- SKF Bearing Insert 40 mm ID 56.8 mm OD FYJ 45 KF
- SKF Bearing Insert 60 mm ID 82.5 mm OD FYJ 65 KF
- SKF Bearing Insert 30 mm ID 46.1 mm OD FYJ 35 KF
- SKF Bearing Insert 85 mm ID 108 mm OD FYJ 509
- SKF Bearing Insert 90 mm ID 118 mm OD FYJ 510
- SKF Bearing Insert 180 mm ID 221 mm OD FYJ 520