Moflash LEDS100 Series Amber Flashing Beacon 230V, LED Bulb Surface, IP65

Voir l’ensemble des Beacons

Sous-total (1 unité)*

64,15 €

(TVA exclue)

77,62 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • Plus 14 unité(s) expédiée(s) à partir du 23 mars 2026
  • Plus 2 unité(s) expédiée(s) à partir du 05 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +64,15 €

*Prix donné à titre indicatif

N° de stock RS:
865-1704
Référence fabricant:
LEDS100-05-01
Fabricant:
Moflash
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Moflash

Product Type

Beacon

Light Effect

Flashing

Lens Colour

Amber

Housing Material

Polycarbonate, ABS

Bulb Type

LED

Current Consumption

35 mA

Current Type

AC/DC

Mount Type

Surface

Base Diameter

72mm

Housing Colour

Black

Maximum Supply Voltage

230V

Lamp Included

Yes

Series

LEDS100

Minimum Operating Temperature

-25°C

Maximum Operating Temperature

55°C

Height

107mm

IP Rating

IP65

Standards/Approvals

CE Certified

Pays d'origine :
GB

Moflash Amber LED Beacon, 40 to 380V DC, 85 to 285V AC - LEDS100 Series - LEDS100-05-01


This Moflash LED (light-emitting diode) beacon is used to signal hazards in commercial and industrial work environments. The warning light has a 360° output along the vertical axis to make sure the warning signal is visible in all directions. The LED bulb is bright enough to be seen clearly in most lighting conditions for effective signalling. It's also energy-efficient thanks to its low current consumption of just 35mA. For versatility, the light can be set to a flashing or continuous mode via a jumper link on the PCB (printed circuit board).

Features & Benefits


• Broad operating temperature range of -25°C to +55°C for use in demanding environments

• Polycarbonate (PC) lens material is impact-resistant and UV (ultraviolet) stable for use in harsh conditions

• Wide supply voltage range of 40 to 380V DC (direct current) or 85 to 285V AC (alternating current) for use in most set-ups

Applications


• Maintenance equipment

• Emergency service vehicles

• Airport baggage claims

• Manufacturing lines

Is this beacon suitable for use in damp or dusty environments?


The beacon has an IP65 (ingress protection) rating, so it's completely protected against dust and low-pressure water jets from all directions.

Moflash Industrial ECO LED Beacon - LEDS100 Series


The LEDS100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing.

The ECO LEDS beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades.

This design allows for termination inside the enclosure through the base of the beacon, either from directly below or using a 6mm cabling channel at 90° to the base for surface cabling. The LEDS incorporates two mounting studs 2 x 5mm on 45mm centres.

Dual function, flashing or continuous (static) mode

Continuously rated

LED long life

Low current consumption

Suitable for surface, conduit box or wall mounting

2 stud fixing

360° light output around the vertical axis

Dustproof and weatherproof

UV stable polycarbonate lens

UV stable ABS plastic base

160 flashes per minute (FPM)

IP65 protection

RoHS compliant

CE Marked

Liens connexes