Werma BWM 853 Series Red Flashing Beacon, 24 V dc, Surface Mount, Wall Mount, LED Bulb, IP66, IP67
- N° de stock RS:
- 746-5035
- Référence fabricant:
- 853.120.55
- Fabricant:
- Werma
Visuel non contractuel
Sous-total (1 unité)*
175,20 €
(TVA exclue)
211,99 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s)
- Plus 3 unité(s) expédiée(s) à partir du 26 janvier 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 175,20 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 746-5035
- Référence fabricant:
- 853.120.55
- Fabricant:
- Werma
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Werma | |
| Supply Voltage | 24 V dc | |
| Light Effect | Flashing | |
| Lens Colour | Red | |
| Mounting Style | Surface Mount, Wall Mount | |
| Bulb Type | LED | |
| Current Type | DC | |
| Current Consumption | 200mA | |
| Housing Colour | Black | |
| Lamp Included | Yes | |
| Series | BWM 853 | |
| Multifunction | No | |
| Height | 72mm | |
| Base Length | 85mm | |
| IP Rating | IP66, IP67 | |
| Minimum Temperature | -25°C | |
| Maximum Temperature | +50°C | |
| Standards Met | CE, EAC | |
| Base Width | 85mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Werma | ||
Supply Voltage 24 V dc | ||
Light Effect Flashing | ||
Lens Colour Red | ||
Mounting Style Surface Mount, Wall Mount | ||
Bulb Type LED | ||
Current Type DC | ||
Current Consumption 200mA | ||
Housing Colour Black | ||
Lamp Included Yes | ||
Series BWM 853 | ||
Multifunction No | ||
Height 72mm | ||
Base Length 85mm | ||
IP Rating IP66, IP67 | ||
Minimum Temperature -25°C | ||
Maximum Temperature +50°C | ||
Standards Met CE, EAC | ||
Base Width 85mm | ||
- Pays d'origine :
- DE
WERMA Red LED Double-Flash Beacon, 24V DC, 80mA - BWM 853 Series - 853.120.55
Quickly warn personnel of an emergency situation with this LED beacon from WERMA. Its LED bulb is visible in most light conditions and produces a double-flash effect for an urgent signal. Its long service life of 50,000 hours means it won't need frequent replacement. Thanks to the quick-release screws in its base, it's simple to assemble and disassemble as needed. The glass fibre-reinforced polypropylene (PP-GF) housing material is resistant to impact and heat for use in harsh industrial environments.
Features & Benefits
• Screw terminals for a secure electrical connection
• IP67 (ingress protection) rating for protection against dust and submersion in 1m of water for up to 30 minutes when used with a cable gland
• Broad operating temperature range of -25°C to +50°C for use in hot and cold environments
• IP67 (ingress protection) rating for protection against dust and submersion in 1m of water for up to 30 minutes when used with a cable gland
• Broad operating temperature range of -25°C to +50°C for use in hot and cold environments
Applications
• Fire alarm systems
• Machine maintenance
• Warehouses and loading areas
• Machine maintenance
• Warehouses and loading areas
How can I mount this flash beacon?
The beacon is supplied with a fixing bracket for ease of installation. Simply screw two holes in your wall, attach the fixing bracket and snap the beacon into place.
Liens connexes
- Werma BWM 853 Series Yellow Flashing Beacon Wall Mount, LED Bulb
- Werma BWM 853 Series Yellow Flashing Beacon Wall Mount IP66, IP67
- Werma BWM 853 Series Red Flashing Beacon Surface Mount LED Bulb IP67
- Werma BWM 853 Series Yellow Double Flashing Beacon Surface Mount LED Bulb, IP67
- Werma BWM 853 Series Red Flashing Beacon Surface Mount LED Bulb IP67
- Werma BWM 853 Series Yellow Flashing Beacon Surface Mount LED Bulb IP67
- Werma BWM 853 Series Red Double Flashing Beacon Surface Mount LED Bulb IP67
- Werma 853 Series Blue Flashing Beacon Base Mount/ Wall Mount, LED Bulb