Werma 802 Series Red Flashing Beacon 115V, Xenon Bulb Built-In, IP65
- N° de stock RS:
- 251-8585
- Référence fabricant:
- 802.100.67
- Fabricant:
- Werma
Sous-total (1 unité)*
128,40 €
(TVA exclue)
155,36 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 + | 128,40 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 251-8585
- Référence fabricant:
- 802.100.67
- Fabricant:
- Werma
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Werma | |
| Product Type | Beacon | |
| Light Effect | Flashing | |
| Lens Colour | Red | |
| Housing Material | Polycarbonate | |
| Bulb Type | Xenon | |
| Current Consumption | 1 A | |
| Mount Type | Built-In | |
| Current Type | AC | |
| Base Diameter | 57mm | |
| Terminal Type | Screw | |
| Housing Colour | Black | |
| Lamp Included | Yes | |
| Maximum Supply Voltage | 115V | |
| Series | 802 | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 50°C | |
| Height | 85mm | |
| IP Rating | IP65 | |
| Standards/Approvals | RoHS | |
| Sélectionner tout | ||
|---|---|---|
Marque Werma | ||
Product Type Beacon | ||
Light Effect Flashing | ||
Lens Colour Red | ||
Housing Material Polycarbonate | ||
Bulb Type Xenon | ||
Current Consumption 1 A | ||
Mount Type Built-In | ||
Current Type AC | ||
Base Diameter 57mm | ||
Terminal Type Screw | ||
Housing Colour Black | ||
Lamp Included Yes | ||
Maximum Supply Voltage 115V | ||
Series 802 | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 50°C | ||
Height 85mm | ||
IP Rating IP65 | ||
Standards/Approvals RoHS | ||
- Pays d'origine :
- DE
The Werma permanent beacon ensure optimal workplace safety. The bright Flashing red LED (light-emitting diode) indicates your system is in working order, while the smart quadratic design lets you connect additional beacons on any side. The beacon mounts s
LED Flashing beacon in attractive quadratic form
Innovative connector to create traffic light combinations
Thread/membrane combination keeps cabling requirements to a minimum
IP66/67 Ratings
Liens connexes
- Werma 802 Series Yellow Flashing Beacon Built-in Mounting, Xenon Bulb
- Werma 802 Series Yellow Flashing Beacon Built-in Mounting, Xenon Bulb
- Werma 802 Series Red Flashing Beacon Built-in Mounting, Xenon Bulb
- Werma 802 Series Yellow Flashing Beacon Built-in Mounting, Xenon Bulb
- Werma 802 Series Red Flashing Beacon Built-in Mounting, Xenon Bulb
- Werma 817 Series Yellow Flashing Beacon Built-in Mounting, Xenon Bulb
- Werma 208 Series Yellow Flashing Beacon Built-in Mounting, Xenon Bulb
- Werma 817 Series Red Flashing Beacon Built-in Mounting, Xenon Bulb