Werma 262 Series Clear Flashing Light Module 230V, Xenon Bulb, IP66
- N° de stock RS:
- 251-8243
- Numéro d'article Distrelec:
- 301-50-043
- Référence fabricant:
- 262.420.60
- Fabricant:
- Werma
Sous-total (1 unité)*
317,69 €
(TVA exclue)
384,40 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 + | 317,69 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 251-8243
- Numéro d'article Distrelec:
- 301-50-043
- Référence fabricant:
- 262.420.60
- Fabricant:
- Werma
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Werma | |
| Product Type | Light Module | |
| Light Effect | Flashing | |
| Lens Colour | Clear | |
| Housing Material | Polycarbonate | |
| Bulb Type | Xenon | |
| Current Type | AC | |
| Current Consumption | 6000mA | |
| Base Diameter | 120mm | |
| Terminal Type | Push-in | |
| Housing Colour | Grey | |
| Maximum Supply Voltage | 230V | |
| Lamp Included | Yes | |
| Series | 262 | |
| Minimum Operating Temperature | -30°C | |
| Maximum Operating Temperature | 60°C | |
| Height | 173mm | |
| IP Rating | IP66 | |
| Standards/Approvals | RoHS | |
| Sélectionner tout | ||
|---|---|---|
Marque Werma | ||
Product Type Light Module | ||
Light Effect Flashing | ||
Lens Colour Clear | ||
Housing Material Polycarbonate | ||
Bulb Type Xenon | ||
Current Type AC | ||
Current Consumption 6000mA | ||
Base Diameter 120mm | ||
Terminal Type Push-in | ||
Housing Colour Grey | ||
Maximum Supply Voltage 230V | ||
Lamp Included Yes | ||
Series 262 | ||
Minimum Operating Temperature -30°C | ||
Maximum Operating Temperature 60°C | ||
Height 173mm | ||
IP Rating IP66 | ||
Standards/Approvals RoHS | ||
- Pays d'origine :
- DE
The Werma permanent beacon ensure optimal workplace safety. The bright Flashing Clear LED (light-emitting diode) indicates your system is in working order, while the smart quadratic design lets you connect additional beacons on any side. The beacon mounts
LED Flashing beacon in attractive quadratic form
Innovative connector to create traffic light combinations
Thread/membrane combination keeps cabling requirements to a minimum
IP66/67 Ratings
Liens connexes
- Werma 262 Series Clear Light Module 230V IP66
- Werma 262 Series Green Flashing Light Module 230V IP66
- Werma 262 Series Blue Flashing Light Module 230V IP66
- Werma 260 Series Clear Flashing Light Module 230V IP66
- Werma 261 Series Clear Flashing Light Module 230V IP66
- Werma 262 Series Blue Light Module 230V IP66
- Werma 262 Series Green Light Module 230V IP66
- Werma KS70 Series Clear Flashing Effect Flashing Light Element AC, IP54