Moflash LED195 Series Red Flashing Beacon 48V, LED Bulb Rear, Side, IP65

Voir l’ensemble des Beacons

Sous-total (1 unité)*

88,19 €

(TVA exclue)

106,71 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 10 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 12 unité(s) expédiée(s) à partir du 20 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +88,19 €

*Prix donné à titre indicatif

N° de stock RS:
122-6675
Référence fabricant:
LED195-05WH-02
Fabricant:
Moflash
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Moflash

Product Type

Beacon

Light Effect

Flashing

Lens Colour

Red

Housing Material

ABS

Bulb Type

LED

Mount Type

Rear, Side

Current Type

AC/DC

Current Consumption

35 mA

Base Diameter

104mm

Terminal Type

Terminal Block

Housing Colour

White

Lamp Included

Yes

Maximum Supply Voltage

48V

Minimum Operating Temperature

-25°C

Series

LED195

Maximum Operating Temperature

55°C

Height

73mm

IP Rating

IP65

Standards/Approvals

CE Certified

Pays d'origine :
GB

Moflash Red Flashing LED Beacon, 370V DC, 280V AC - LED195 Series - LED195-05WH-02


Mount this flashing beacon from Moflash to a wall or flat surface for bright and reliable hazard signalling. It has an LED (light-emitting diode) lamp that produces a bright light that's visible in most lighting conditions. It's also a triple-mode beacon, so you can quickly and easily change light patterns with the jumper link on the printed circuit board (PCB). One mode has a flashing rate of 60FPM (flashes per minute), while another mode has a flashing rate of 120FPM for a more rapid and urgent signal. You can also set the light to a continuous static mode for steady illumination.

Features & Benefits


• Compact base diameter of 104mm to take up minimal space

• Wide operating temperature range of -25°C to +55°C for use in demanding environments

• 120° light output on a vertical axis for widespread visibility

Applications


• Laboratories

• Baggage claims

• Emergency vehicles

• Industrial automation

Is this beacon suitable for outdoor use?


Yes, this watertight beacon has an IP65 (ingress protection) rating, so it's built to withstand exposure to dust and low-pressure water jets. The O-ring slots around the base provide further protection against water.

Moflash Industrial LED Beacon - LED195 Series


Professional range of Moflash industrial LED beacons from the LED195 series. The LED beacons are designed for industrial or commercial applications where low maintenance, long life and cost effective solutions are required. The LED beacons have two stages of alarm. Flashing or continuous modes can be changed via a jumper link.

Continuously rated

LED long life

Low current consumption

Dustproof

Weatherproof

Cable termination inside the enclosure

Deep or Shallow base options

Liens connexes