onsemi NCS35011DTBR2G, Battery Charger IC 21V Input 3.3V Output 10 mA, TSSOP-16 16-Pin
- N° de stock RS:
- 284-9046
- Référence fabricant:
- NCS35011DTBR2G
- Fabricant:
- onsemi
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 paquet de 5 unités)*
5,63 €
(TVA exclue)
6,81 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 26 février 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 5 - 45 | 1,126 € | 5,63 € |
| 50 - 95 | 0,97 € | 4,85 € |
| 100 - 495 | 0,84 € | 4,20 € |
| 500 - 995 | 0,74 € | 3,70 € |
| 1000 + | 0,674 € | 3,37 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 284-9046
- Référence fabricant:
- NCS35011DTBR2G
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Product Type | Battery Charger IC | |
| Sub Type | Multi-Cell Lithium-Ion Battery Monitor | |
| Mount Type | Solder | |
| Package Type | TSSOP-16 | |
| Pin Count | 16 | |
| Output Current | 10mA | |
| Maximum Supply Voltage | 21V | |
| Maximum Operating Temperature | 85°C | |
| Minimum Operating Temperature | -40°C | |
| Length | 5mm | |
| Series | NCS35011 | |
| Height | 1mm | |
| Standards/Approvals | RoHS, REACH | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Product Type Battery Charger IC | ||
Sub Type Multi-Cell Lithium-Ion Battery Monitor | ||
Mount Type Solder | ||
Package Type TSSOP-16 | ||
Pin Count 16 | ||
Output Current 10mA | ||
Maximum Supply Voltage 21V | ||
Maximum Operating Temperature 85°C | ||
Minimum Operating Temperature -40°C | ||
Length 5mm | ||
Series NCS35011 | ||
Height 1mm | ||
Standards/Approvals RoHS, REACH | ||
Automotive Standard No | ||
The ON Semiconductor ultra low power protection integrated circuit managing lithium-ion batteries from 3 to 5 cells in series with accurate battery voltage indication up to 5 LED outputs. Each cell in the battery pack is monitored for an over-voltage and under-voltage condition. Upon detecting an over-voltage, the ODI pin will assert indicating a fault condition and stay asserted until the fault is cleared. During an under voltage condition, the UDI pin will also assert indicating the fault but will have a pulse width that is pre−set in the protector. Both over and under voltage detections have a hard coded pre-set delay time before fault indication.
Over voltage and under voltage detection
Protection for 3, 4 and 5 series cells
High accuracy voltage measurement ±5 mV
These devices are Pb free and are RoHS compliant
Liens connexes
- onsemi TSSOP-16 16-Pin
- Texas Instruments 36 V to 25V Input 3.3V Output, TSSOP 20-Pin
- Texas Instruments BQ7692006PWR 36 V to 25V Input 3.3V Output, TSSOP 20-Pin
- ROHM ML5243-002TDZ0ATL 18 V to 25V Input 3.3V Output 10 mA, TSSOP 20-Pin
- ROHM ML5243-001TDZ0ARL 18 V to 25V Input 3.3V Output 10 mA, TSSOP 20-Pin
- ROHM ML5243-003TDZ0ATL 5 V to 25V Input 3.3V Output 10 mA, TSSOP 20-Pin
- ROHM ML5243-004TDZ0ATL 5 V to 25V Input 3.3V Output 10 mA, TSSOP 20-Pin
- STMicroelectronics 3.3 V to 3.3V Input 3.3V Output 300 μA, VFQFPN-32 32-Pin