STMicroelectronics, Battery Charge Controller IC, 2.7 V to 5.5V Input 2.5 A, DFN 8-Pin
- N° de stock RS:
- 196-2009P
- Référence fabricant:
- STC3100IQT
- Fabricant:
- STMicroelectronics
Offre groupée disponible
Consulter les options de prix de grosSous-total 50 unités (conditionné en bande continue)*
96,90 €
(TVA exclue)
117,25 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 8 645 unité(s) expédiée(s) à partir du 14 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 50 - 245 | 1,938 € |
| 250 - 495 | 1,892 € |
| 500 + | 1,796 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 196-2009P
- Référence fabricant:
- STC3100IQT
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | Battery Charge Controller IC | |
| Sub Type | Battery Charge Controller IC | |
| Mount Type | Surface | |
| Package Type | DFN | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 2.7V | |
| Output Current | 2.5A | |
| Maximum Operating Temperature | 85°C | |
| Maximum Supply Voltage | 5.5V | |
| Standards/Approvals | No | |
| Minimum Operating Temperature | -40°C | |
| Series | STC3100 | |
| Height | 0.95mm | |
| Length | 3.15mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type Battery Charge Controller IC | ||
Sub Type Battery Charge Controller IC | ||
Mount Type Surface | ||
Package Type DFN | ||
Pin Count 8 | ||
Minimum Supply Voltage 2.7V | ||
Output Current 2.5A | ||
Maximum Operating Temperature 85°C | ||
Maximum Supply Voltage 5.5V | ||
Standards/Approvals No | ||
Minimum Operating Temperature -40°C | ||
Series STC3100 | ||
Height 0.95mm | ||
Length 3.15mm | ||
Automotive Standard No | ||
The STC3100 monitors the critical parameters of a single-cell Li-Ion battery (voltage, temperature and current) and includes hardware functions to implement a gas gauge for battery charge monitoring, based on a programmable 12- to 14-bit A/D converter. With a typical 30 milliOhms external sense resistor, the battery current can be up to 2.5 A and the accumulator system provides a capacity up to +/-7000 mAh with a resolution of 0.2 mAh.
8-byte unique device ID
32-RAM bytes
Battery voltage monitoring
Coulomb counter with 12/14-bit AD converter, +/- 80 mV input voltage range
Internal temperature sensor
I2C interface for gas gauge monitoring and device control
One general-purpose I/O
Internal or external 32768 Hz time base