RS PRO AAA Battery Holder Coil Spring
- N° de stock RS:
- 512-3552
- Fabricant:
- RS PRO
Sous-total (1 unité)*
1,50 €
(TVA exclue)
1,82 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 630 unité(s) expédiée(s) à partir du 21 septembre 2026
- Plus 10 865 unité(s) expédiée(s) à partir du 21 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 1,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 512-3552
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Battery Holder | |
| Compatible Battery Size | AAA | |
| Number of Cells | 2 | |
| Sub Type | Battery Holder | |
| Mount Type | Chassis | |
| Body Material | Polypropylene | |
| Termination Type | Coil Spring | |
| Series | RS PRO | |
| Width | 24.7mm | |
| Standards/Approvals | No | |
| Diameter | 10.1mm | |
| Height | 13mm | |
| Length | 52.3mm | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Battery Holder | ||
Compatible Battery Size AAA | ||
Number of Cells 2 | ||
Sub Type Battery Holder | ||
Mount Type Chassis | ||
Body Material Polypropylene | ||
Termination Type Coil Spring | ||
Series RS PRO | ||
Width 24.7mm | ||
Standards/Approvals No | ||
Diameter 10.1mm | ||
Height 13mm | ||
Length 52.3mm | ||
- Pays d'origine :
- TW
RS PRO AAA Battery Holder, Coil Spring Contact
The RS PRO AAA battery holder is used for inserting cells into battery compartments. It has two nickel-plated steel coiled springs that press against the battery terminals to make electrical contact. Holding two AAA cells in parallel, it delivers an output voltage of 3 V.
The electrical output travels via two colour-coded, unterminated leads, which be soldered or crimped to a printed circuit board or another wire. The device can also connect to two different terminals, such as a press stud battery contact and a ferrule.
Mount the battery holder onto the chassis of the enclosing compartment by using the three pre-drilled mounting holes on the base. The unit measures 52.3 mm by 24.7 mm by 13 mm and is made of black polypropylene (PP) material, which has a high resistance to chemicals. It can be used in small electrical devices at temperatures up to +82°C.
Features and Benefits
• Holds 2 x AAA batteries
• Chassis mount
• Three mounting holes
• Dimensions 52.3 mm x 24.7 mm x 13 mm
• Maximum operating temperature of 82°C
• Coil spring terminal contact type
• Body material of polypropylene (PP)
• Black in colour
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.