Igus M6 Ball Joint, Metric Right Hand Thread Standard
- N° de stock RS:
- 712-4986
- Référence fabricant:
- WGRM-06-LC-MS
- Fabricant:
- Igus
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
4,85 €
(TVA exclue)
5,87 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 10 unité(s) expédiée(s) à partir du 26 octobre 2026
- Plus 413 unité(s) expédiée(s) à partir du 26 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 4,85 € |
| 5 - 9 | 4,66 € |
| 10 - 24 | 4,56 € |
| 25 + | 4,47 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 712-4986
- Référence fabricant:
- WGRM-06-LC-MS
- Fabricant:
- Igus
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Igus | |
| Product Type | Ball Joint | |
| Sub Type | Angled Ball & Socket Joint | |
| Thread Standard | Metric | |
| Thread Size | M6 | |
| Ball Diameter | 10mm | |
| Material | Igumid G | |
| Standards/Approvals | No | |
| Thread Direction | Right Hand | |
| Sélectionner tout | ||
|---|---|---|
Marque Igus | ||
Product Type Ball Joint | ||
Sub Type Angled Ball & Socket Joint | ||
Thread Standard Metric | ||
Thread Size M6 | ||
Ball Diameter 10mm | ||
Material Igumid G | ||
Standards/Approvals No | ||
Thread Direction Right Hand | ||
- Pays d'origine :
- DE
Igus Ball Joint, M6 Thread Size, 10mm Ball Diameter - WGRM-06-LC-MS
This ball joint provides a compact articulating connection for mechanical systems, designed for angled rod-end applications. It combines a polymer socket with a spherical insert to allow multi-axis movement while maintaining a secure threaded attachment suitable for metric-threaded assemblies.
Features and Benefits:
• Right-hand metric thread enables straightforward installation and replacement
• Angled ball-and-socket geometry permits multi-axis articulation
• 10mm ball offers consistent rotational contact for smooth motion
• Igumid G polymer construction reduces sliding friction in joints
• Designed as a rod-end bearing alternative for space-constrained linkages
• Angled ball-and-socket geometry permits multi-axis articulation
• 10mm ball offers consistent rotational contact for smooth motion
• Igumid G polymer construction reduces sliding friction in joints
• Designed as a rod-end bearing alternative for space-constrained linkages
Applications
• Suitable for linkage joints in automated picking systems
• Ideal for pivot connections in electronic actuator assemblies
• Can be used for motion joints in mechanical prototypes
• Ideal for pivot connections in electronic actuator assemblies
• Can be used for motion joints in mechanical prototypes
What thread specification should I prepare on mating components?
Use a metric M6 thread with right-hand orientation to match the connector’s fastening profile.
How does the material choice affect wear in continuous motion?
The Igumid G polymer offers low-friction contact that moderates abrasive wear rates compared with harder materials in repeated articulation.
Is this item suitable as a direct replacement for metal rod ends?
It can replace metal rod ends where lower friction and polymer compliance are acceptable and where the 10mm spherical interface meets load and motion requirements.
What form factor allows it to serve angled connections?
The angled ball-and-socket configuration provides off-axis movement capability suited to non-linear linkages without additional swivelling components.
Note
Thread sizes quoted are for male and female threads of respective ball and socket
Liens connexes
- Igus M5 Ball Joint, Metric Right Hand Thread Standard
- Igus M10 Ball Joint, Metric Right Hand Thread Standard
- Igus M8 Ball Joint, Metric Right Hand Thread Standard
- EVENTUS Threading Tap Metric Standard, Hand Tap
- Tivoly Tap Set Metric Standard, Hand Tap
- Dormer Tap Set Metric Standard, Hand Tap
- RS PRO Tap Set Metric Standard, Hand Tap
- RS PRO Threading Tap Metric Standard, Hand Tap