SKF 7205 BEP 1 Row Ball Bearing - 25 mm ID, 52 mm OD 15 mm Race Width

Bénéficiez d'une remise sur les achats en gros

Ajoutez 5 de plus pour économiser 6,45 €

Consulter les options de prix de gros

Sous-total (1 unité)*

32,02 €

(TVA exclue)

38,74 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 17 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité
Prix par unité
Économie
1 - 432,02 €-
5 - 930,73 €6,45 €
10 - 2430,10 €19,20 €
25 +29,46 €64,00 €

*Prix donné à titre indicatif

N° de stock RS:
285-1557
Référence fabricant:
7205 BEP
Fabricant:
SKF
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

SKF

Inside Diameter

25mm

Product Type

Ball Bearing

Outside Diameter

52mm

Race Width

15mm

Ball Material

Steel

Cage Material

Non-Metallic

End Type

Open

Number of Rows

1

Internal Clearance

CN

Static Load Rating

9.3kN

Contact Angle

40°

Dynamic Load Rating

14.8kN

Standards/Approvals

No

Bore Type

Parallel

Series

2 Light

Limiting Speed

15000rpm

Bearing Type

Single Row Angular Contact Ball

Race Type

Plain

Statut RoHS : Exempté

SKF Plain Angular-Contact Ball Bearing, 25mm ID, 52mm OD - 7205 BEP


Need a reliable bearing to support a high axial load combined with a radial load? Choose this angular-contact ball bearing from SKF. It has a contact angle of 40°, giving it a high loading capacity of 9.3kN (static) or 14.8kN (dynamic). The balls are spaced with a cage made from nylon 66 that's reinforced with fibreglass for added toughness. As an open-type bearing, this unit is easy to lubricate and can tolerate relatively high speeds.

• Parallel bore means it can be mounted directly onto a shaft without the need for an adapter sleeve

• Steel construction material combines strength with corrosion resistance

Applications


• Machine tools

• Steel mills

• Wind energy equipment

• Gearboxes

Can this single-row angular-contact ball bearing accommodate axial loads in both directions?


No, this bearing can only accept axial loads in one direction, so it must be mounted against a second, conventional bearing.

How are angular-contact ball bearings constructed?


Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other. The axial-load capacity of the bearing increases as the contact angle increases.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.